macb clock handling (Was: [PATCH v1 4/5] net: macb: Compatible as per device tree)

[Heiko Stübner]

Hi,

not wanting to hijack this too much, but does the mac driver also need
some sort of clock handling?

Because on the Icicle I have here, I'm running into "TX timeout" errors:

RISC-V # dhcp
ethernet at 20112000: PHY present at 9
ethernet at 20112000: Starting autonegotiation...
ethernet at 20112000: Autonegotiation complete
ethernet at 20112000: link up, 1000Mbps full-duplex (lpa: 0x3800)
BOOTP broadcast 1
ethernet at 20112000: TX timeout
BOOTP broadcast 2
ethernet at 20112000: TX timeout
BOOTP broadcast 3
ethernet at 20112000: TX timeout
BOOTP broadcast 4
ethernet at 20112000: TX timeout

The sifive variant of the macb distinguishes between speeds in its
cllk_init callback, so I guess the Icicle might need that as well?


Thanks
Heiko

Am Freitag, 22. Oktober 2021, 10:56:47 CET schrieb Padmarao Begari:
> Update compatible as per Microchip PolarFire SoC ethernet
> device node.
> 
> Signed-off-by: Padmarao Begari <padmarao.begari at microchip.com>
> ---
>  drivers/net/macb.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/net/macb.c b/drivers/net/macb.c
> index 8c6461e717..1b867bd5c2 100644
> --- a/drivers/net/macb.c
> +++ b/drivers/net/macb.c
> @@ -1502,7 +1502,7 @@ static const struct udevice_id macb_eth_ids[] = {
>  	{ .compatible = "cdns,zynq-gem" },
>  	{ .compatible = "sifive,fu540-c000-gem",
>  	  .data = (ulong)&sifive_config },
> -	{ .compatible = "microchip,mpfs-mss-gem",
> +	{ .compatible = "microchip,mpfs-gem",
>  	  .data = (ulong)&microchip_config },
>  	{ }
>  };
>