[PATCH V3 5/5] doc: imx8mq_evk: update doc after using binman

[Patrick Wildt]

On Fri, Oct 22, 2021 at 10:42:20AM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan at nxp.com>
> 
> Update doc after using binman to pack images

Not necessary if we make sure flash.bin stays a single bootable image

> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
>  doc/board/nxp/imx8mq_evk.rst | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/doc/board/nxp/imx8mq_evk.rst b/doc/board/nxp/imx8mq_evk.rst
> index c269fdebe3..92eeda79aa 100644
> --- a/doc/board/nxp/imx8mq_evk.rst
> +++ b/doc/board/nxp/imx8mq_evk.rst
> @@ -43,13 +43,14 @@ Build U-Boot
>  
>     $ export CROSS_COMPILE=aarch64-poky-linux-
>     $ make imx8mq_evk_defconfig
> -   $ make flash.bin
> +   $ make
>  
>  Burn the flash.bin to MicroSD card offset 33KB:
>  
>  .. code-block:: bash
>  
>     $sudo dd if=flash.bin of=/dev/sd[x] bs=1024 seek=33 conv=notrunc
> +   $sudo dd if=u-boot.itb of=/dev/sd[x] bs=1024 seek=384 conv=notrunc
>  
>  Boot
>  ----
> -- 
> 2.30.0
>