[PATCH V2 09/17] arm: j721e: Add support for selecting DT based on EEPROM

Sinthu Raja M sinthu.raja at mistralsolutions.com
Fri Nov 12 14:32:49 CET 2021


Hi Tom,

On Mon, Nov 8, 2021 at 9:23 PM Tom Rini <trini at konsulko.com> wrote:
>
> On Tue, Nov 02, 2021 at 07:35:50PM +0530, Sinthu Raja wrote:
>
> > From: Sinthu Raja <sinthu.raja at ti.com>
> >
> > Enable support for selecting DTB from FIT within SPL based on the
> > board name read from EEPROM. This will help to use single defconfig
> > for both EVM and SK.
> >
> > Also print FDT model name and board name read from EEPROM on SPL debug
> > console. This is useful to verify that right dtb is loaded in each boot
> > stage.
> >
> > Signed-off-by: Sinthu Raja <sinthu.raja at ti.com>
> > ---
> >
> > No changes in V2.
> >
> >  arch/arm/mach-k3/j721e_init.c | 62 +++++++++++++++++++++++++++++++++++
> >  1 file changed, 62 insertions(+)
>
> The EEPROM scheme is not K3-generic, but rather TI reference platform
> specific, so this needs to be abstracted to exist and be called from
> under board/ti/j721e/.. thanks.
>
I guess the commit description is a little misleading. It just calls
the board_detect function which is existed under the board/ti/j721e.
Printing of board info is not required here which can be removed.

Regards,
Sinthu Raja.
> --
> Tom



-- 
With Regards
Sinthu Raja


More information about the U-Boot mailing list