[PATCH v2 07/11] mmc: fsl_esdhc_imx: simplify 64bit check for SDMA transfers

[Sean Anderson]

[ fsl_esdhc commit da86e8cfcb03ed5c1d8e0718bc8bc8583e60ced8 ]

SDMA can only do DMA with 32 bit addresses. This is true for all
architectures (just doesn't apply to 32 bit ones). Simplify the code and
remove unnecessary CONFIG_FSL_LAYERSCAPE.

Also make the error message more concise.

Signed-off-by: Michael Walle <michael at walle.cc>
Signed-off-by: Sean Anderson <sean.anderson at seco.com>
---

(no changes since v1)

 drivers/mmc/fsl_esdhc_imx.c | 33 ++++++---------------------------
 1 file changed, 6 insertions(+), 27 deletions(-)

diff --git a/drivers/mmc/fsl_esdhc_imx.c b/drivers/mmc/fsl_esdhc_imx.c
index 95cde9e410..3588056759 100644
--- a/drivers/mmc/fsl_esdhc_imx.c
+++ b/drivers/mmc/fsl_esdhc_imx.c
@@ -282,10 +282,7 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
 {
 	int timeout;
 	struct fsl_esdhc *regs = priv->esdhc_regs;
-#if defined(CONFIG_S32V234) || defined(CONFIG_IMX8) || defined(CONFIG_IMX8M) || \
-	defined(CONFIG_IMX8ULP)
 	dma_addr_t addr;
-#endif
 	uint wml_value;
 
 	wml_value = data->blocksize/4;
@@ -296,16 +293,10 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
 
 		esdhc_clrsetbits32(&regs->wml, WML_RD_WML_MASK, wml_value);
 #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
-#if defined(CONFIG_S32V234) || defined(CONFIG_IMX8) || defined(CONFIG_IMX8M) || \
-	defined(CONFIG_IMX8ULP)
 		addr = virt_to_phys((void *)(data->dest));
 		if (upper_32_bits(addr))
-			printf("Error found for upper 32 bits\n");
-		else
-			esdhc_write32(&regs->dsaddr, lower_32_bits(addr));
-#else
-		esdhc_write32(&regs->dsaddr, (u32)data->dest);
-#endif
+			printf("Cannot use 64 bit addresses with SDMA\n");
+		esdhc_write32(&regs->dsaddr, lower_32_bits(addr));
 #endif
 	} else {
 #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
@@ -334,16 +325,10 @@ static int esdhc_setup_data(struct fsl_esdhc_priv *priv, struct mmc *mmc,
 		esdhc_clrsetbits32(&regs->wml, WML_WR_WML_MASK,
 					wml_value << 16);
 #ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
-#if defined(CONFIG_S32V234) || defined(CONFIG_IMX8) || defined(CONFIG_IMX8M) || \
-		defined(CONFIG_IMX8ULP)
 		addr = virt_to_phys((void *)(data->src));
 		if (upper_32_bits(addr))
-			printf("Error found for upper 32 bits\n");
-		else
-			esdhc_write32(&regs->dsaddr, lower_32_bits(addr));
-#else
-		esdhc_write32(&regs->dsaddr, (u32)data->src);
-#endif
+			printf("Cannot use 64 bit addresses with SDMA\n");
+		esdhc_write32(&regs->dsaddr, lower_32_bits(addr));
 #endif
 	}
 
@@ -400,18 +385,12 @@ static void check_and_invalidate_dcache_range
 	unsigned end = 0;
 	unsigned size = roundup(ARCH_DMA_MINALIGN,
 				data->blocks*data->blocksize);
-#if defined(CONFIG_S32V234) || defined(CONFIG_IMX8) || defined(CONFIG_IMX8M) || \
-	defined(CONFIG_IMX8ULP)
 	dma_addr_t addr;
 
 	addr = virt_to_phys((void *)(data->dest));
 	if (upper_32_bits(addr))
-		printf("Error found for upper 32 bits\n");
-	else
-		start = lower_32_bits(addr);
-#else
-	start = (unsigned)data->dest;
-#endif
+		printf("Cannot use 64 bit addresses with SDMA\n");
+	start = lower_32_bits(addr);
 	end = start + size;
 	invalidate_dcache_range(start, end);
 }
-- 
2.25.1