[PATCH 2/2] ARM: dts: stm32: Auto-detect DHSOM with uSD level translator

[Marek Vasut]

The uSD level translator on DHSOM and Avenger96 are optional, however it
is possible to auto-detect it. This is done by setting SD CMD line high,
and then testing whether signal level on CK line matches the signal level
on CKIN line. If so, the uSD level translator is present, otherwise it is
not populated.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Patrice Chotard <patrice.chotard at foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
---
 arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi           | 4 ++++
 arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi | 4 ++++
 2 files changed, 8 insertions(+)

diff --git a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
index 71b0486f02a..5b2b09bcfb9 100644
--- a/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcom-u-boot.dtsi
@@ -216,6 +216,10 @@
 
 &sdmmc1 {
 	u-boot,dm-spl;
+	st,use-ckin;
+	st,cmd-gpios = <&gpiod 2 0>;
+	st,ck-gpios = <&gpioc 12 0>;
+	st,ckin-gpios = <&gpioe 4 0>;
 };
 
 &sdmmc1_b4_pins_a {
diff --git a/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi b/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi
index 4b1dbf08387..c96eba99c5e 100644
--- a/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi
+++ b/arch/arm/dts/stm32mp15xx-dhcor-avenger96-u-boot.dtsi
@@ -32,6 +32,10 @@
 
 &sdmmc1 {
 	u-boot,dm-spl;
+	st,use-ckin;
+	st,cmd-gpios = <&gpiod 2 0>;
+	st,ck-gpios = <&gpioc 12 0>;
+	st,ckin-gpios = <&gpioe 4 0>;
 };
 
 &sdmmc1_b4_pins_a {
-- 
2.33.0