[PATCH] drivers: net: add Aspeed MDIO driver
Ryan Chen
ryan_chen at aspeedtech.com
Mon Nov 15 11:21:18 CET 2021
> -----Original Message-----
> From: Dylan Hung <dylan_hung at aspeedtech.com>
> Sent: Tuesday, November 2, 2021 1:42 PM
> To: u-boot at lists.denx.de; joe.hershberger at ni.com; rfried.dev at gmail.com;
> Ryan Chen <ryan_chen at aspeedtech.com>; ChiaWei Wang
> <chiawei_wang at aspeedtech.com>
> Cc: BMC-SW <BMC-SW at aspeedtech.com>
> Subject: [PATCH] drivers: net: add Aspeed MDIO driver
>
> Add a driver for the MDIO interface for Aspeed AST2600 SOC. The driver
> only supports clause 22 for now.
>
> Signed-off-by: Dylan Hung <dylan_hung at aspeedtech.com>
Reviewed-by: Ryan Chen <ryan_chen at aspeedtech.com>
> ---
> drivers/net/Kconfig | 7 +++
> drivers/net/Makefile | 1 +
> drivers/net/aspeed_mdio.c | 128
> ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 136 insertions(+)
> create mode 100644 drivers/net/aspeed_mdio.c
>
> diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index
> 6c12959f37..4638180b74 100644
> --- a/drivers/net/Kconfig
> +++ b/drivers/net/Kconfig
> @@ -826,6 +826,13 @@ config FSL_LS_MDIO
> This driver supports the MDIO bus found on the Fman 10G Ethernet
> MACs and
> on the mEMAC (which supports both Clauses 22 and 45).
>
> +config ASPEED_MDIO
> + bool "Aspeed MDIO interface support"
> + depends on DM_MDIO
> + help
> + This driver supports the MDIO bus of Aspeed AST2600 SOC. The
> driver
> + currently supports Clause 22.
> +
> config MDIO_MUX_MMIOREG
> bool "MDIO MUX accessed as a MMIO register access"
> depends on DM_MDIO_MUX
> diff --git a/drivers/net/Makefile b/drivers/net/Makefile index
> e4078d15a9..fe6c00fa48 100644
> --- a/drivers/net/Makefile
> +++ b/drivers/net/Makefile
> @@ -101,3 +101,4 @@ obj-$(CONFIG_HIGMACV300_ETH) += higmacv300.o
> obj-$(CONFIG_MDIO_SANDBOX) += mdio_sandbox.o
> obj-$(CONFIG_FSL_ENETC) += fsl_enetc.o fsl_enetc_mdio.o
> obj-$(CONFIG_FSL_LS_MDIO) += fsl_ls_mdio.o
> +obj-$(CONFIG_ASPEED_MDIO) += aspeed_mdio.o
> diff --git a/drivers/net/aspeed_mdio.c b/drivers/net/aspeed_mdio.c new file
> mode 100644 index 0000000000..a99715a728
> --- /dev/null
> +++ b/drivers/net/aspeed_mdio.c
> @@ -0,0 +1,128 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * Aspeed MDIO driver
> + *
> + * (C) Copyright 2021 Aspeed Technology Inc.
> + *
> + * This file is inspired from the Linux kernel driver
> +drivers/net/phy/mdio-aspeed.c */
> +
> +#include <common.h>
> +#include <dm.h>
> +#include <log.h>
> +#include <miiphy.h>
> +#include <net.h>
> +#include <reset.h>
> +#include <linux/bitops.h>
> +#include <linux/bitfield.h>
> +#include <linux/io.h>
> +#include <linux/iopoll.h>
> +
> +#define ASPEED_MDIO_CTRL 0x0
> +#define ASPEED_MDIO_CTRL_FIRE BIT(31)
> +#define ASPEED_MDIO_CTRL_ST BIT(28)
> +#define ASPEED_MDIO_CTRL_ST_C45 0
> +#define ASPEED_MDIO_CTRL_ST_C22 1
> +#define ASPEED_MDIO_CTRL_OP GENMASK(27, 26)
> +#define MDIO_C22_OP_WRITE 0b01
> +#define MDIO_C22_OP_READ 0b10
> +#define ASPEED_MDIO_CTRL_PHYAD GENMASK(25, 21)
> +#define ASPEED_MDIO_CTRL_REGAD GENMASK(20, 16)
> +#define ASPEED_MDIO_CTRL_MIIWDATA GENMASK(15, 0)
> +
> +#define ASPEED_MDIO_DATA 0x4
> +#define ASPEED_MDIO_DATA_MDC_THRES GENMASK(31, 24)
> +#define ASPEED_MDIO_DATA_MDIO_EDGE BIT(23)
> +#define ASPEED_MDIO_DATA_MDIO_LATCH GENMASK(22, 20)
> +#define ASPEED_MDIO_DATA_IDLE BIT(16)
> +#define ASPEED_MDIO_DATA_MIIRDATA GENMASK(15, 0)
> +
> +#define ASPEED_MDIO_TIMEOUT_US 1000
> +
> +struct aspeed_mdio_priv {
> + void *base;
> +};
> +
> +static int aspeed_mdio_read(struct udevice *mdio_dev, int addr, int
> +devad, int reg) {
> + struct aspeed_mdio_priv *priv = dev_get_priv(mdio_dev);
> + u32 ctrl;
> + u32 data;
> + int rc;
> +
> + if (devad != MDIO_DEVAD_NONE)
> + return -EOPNOTSUPP;
> +
> + ctrl = ASPEED_MDIO_CTRL_FIRE
> + | FIELD_PREP(ASPEED_MDIO_CTRL_ST,
> ASPEED_MDIO_CTRL_ST_C22)
> + | FIELD_PREP(ASPEED_MDIO_CTRL_OP, MDIO_C22_OP_READ)
> + | FIELD_PREP(ASPEED_MDIO_CTRL_PHYAD, addr)
> + | FIELD_PREP(ASPEED_MDIO_CTRL_REGAD, reg);
> +
> + writel(ctrl, priv->base + ASPEED_MDIO_CTRL);
> +
> + rc = readl_poll_timeout(priv->base + ASPEED_MDIO_DATA, data,
> + data & ASPEED_MDIO_DATA_IDLE,
> + ASPEED_MDIO_TIMEOUT_US);
> +
> + if (rc < 0)
> + return rc;
> +
> + return FIELD_GET(ASPEED_MDIO_DATA_MIIRDATA, data); }
> +
> +static int aspeed_mdio_write(struct udevice *mdio_dev, int addr, int
> +devad, int reg, u16 val) {
> + struct aspeed_mdio_priv *priv = dev_get_priv(mdio_dev);
> + u32 ctrl;
> +
> + if (devad != MDIO_DEVAD_NONE)
> + return -EOPNOTSUPP;
> +
> + ctrl = ASPEED_MDIO_CTRL_FIRE
> + | FIELD_PREP(ASPEED_MDIO_CTRL_ST,
> ASPEED_MDIO_CTRL_ST_C22)
> + | FIELD_PREP(ASPEED_MDIO_CTRL_OP, MDIO_C22_OP_WRITE)
> + | FIELD_PREP(ASPEED_MDIO_CTRL_PHYAD, addr)
> + | FIELD_PREP(ASPEED_MDIO_CTRL_REGAD, reg)
> + | FIELD_PREP(ASPEED_MDIO_CTRL_MIIWDATA, val);
> +
> + writel(ctrl, priv->base + ASPEED_MDIO_CTRL);
> +
> + return readl_poll_timeout(priv->base + ASPEED_MDIO_CTRL, ctrl,
> + !(ctrl & ASPEED_MDIO_CTRL_FIRE),
> + ASPEED_MDIO_TIMEOUT_US);
> +}
> +
> +static const struct mdio_ops aspeed_mdio_ops = {
> + .read = aspeed_mdio_read,
> + .write = aspeed_mdio_write,
> +};
> +
> +static int aspeed_mdio_probe(struct udevice *dev) {
> + struct aspeed_mdio_priv *priv = dev_get_priv(dev);
> + struct reset_ctl reset_ctl;
> + int ret = 0;
> +
> + priv->base = dev_read_addr_ptr(dev);
> +
> + ret = reset_get_by_index(dev, 0, &reset_ctl);
> + reset_deassert(&reset_ctl);
> +
> + return 0;
> +}
> +
> +static const struct udevice_id aspeed_mdio_ids[] = {
> + { .compatible = "aspeed,ast2600-mdio" },
> + { }
> +};
> +
> +U_BOOT_DRIVER(aspeed_mdio) = {
> + .name = "aspeed_mdio",
> + .id = UCLASS_MDIO,
> + .of_match = aspeed_mdio_ids,
> + .probe = aspeed_mdio_probe,
> + .ops = &aspeed_mdio_ops,
> + .plat_auto = sizeof(struct mdio_perdev_priv),
> + .priv_auto = sizeof(struct aspeed_mdio_priv), };
> --
> 2.25.1
More information about the U-Boot
mailing list