[PATCH v5 2/3] mtd: spi-nor-core: Adding different type of command extension in Soft Reset

[JaimeLiao]

Power-on-Reset is a method to restore flash back to 1S-1S-1S mode from 8D-8D-8D
in the begging of probe.

Command extension type is not standardized across flash vendors in DTR mode.

For suiting different vendor flash devices, adding a flag to seperate types for
soft reset on boot.

Signed-off-by: JaimeLiao <jaimeliao.tw at gmail.com>
---
 drivers/mtd/spi/Kconfig        | 7 +++++++
 drivers/mtd/spi/spi-nor-core.c | 7 ++++++-
 2 files changed, 13 insertions(+), 1 deletion(-)

diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig
index 1b2ef37e92..9b7d195770 100644
--- a/drivers/mtd/spi/Kconfig
+++ b/drivers/mtd/spi/Kconfig
@@ -97,6 +97,13 @@ config SPI_FLASH_SMART_HWCAPS
 	 can support a type of operation in a much more refined way compared
 	 to using flags like SPI_RX_DUAL, SPI_TX_QUAD, etc.
 
+config SPI_NOR_BOOT_SOFT_RESET_EXT_INVERT
+	bool "Command extension type is INVERT for Software Reset on boot"
+	default n
+	help
+	 Because of SFDP information can not be get before boot.
+	 So define command extension type is INVERT when Software Reset on boot only.
+
 config SPI_FLASH_SOFT_RESET
 	bool "Software Reset support for SPI NOR flashes"
 	default n
diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c
index 0a6550984b..2b6947cefc 100644
--- a/drivers/mtd/spi/spi-nor-core.c
+++ b/drivers/mtd/spi/spi-nor-core.c
@@ -3661,7 +3661,12 @@ static int spi_nor_soft_reset(struct spi_nor *nor)
 	enum spi_nor_cmd_ext ext;
 
 	ext = nor->cmd_ext_type;
-	nor->cmd_ext_type = SPI_NOR_EXT_REPEAT;
+	if (nor->cmd_ext_type == SPI_NOR_EXT_NONE) {
+		nor->cmd_ext_type = SPI_NOR_EXT_REPEAT;
+#if CONFIG_IS_ENABLED(SPI_NOR_BOOT_SOFT_RESET_EXT_INVERT)
+		nor->cmd_ext_type = SPI_NOR_EXT_INVERT;
+#endif /* SPI_NOR_BOOT_SOFT_RESET_EXT_INVERT */
+	}
 
 	op = (struct spi_mem_op)SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_SRSTEN, 0),
 			SPI_MEM_OP_NO_DUMMY,
-- 
2.17.1