[PATCH 1/4] arm: stm32mp: bsec: Update OTP shadow registers in SPL

[Patrice CHOTARD]

Hi Patrick

On 10/11/21 9:52 AM, Patrick Delaunay wrote:
> Currently the upper OTP (after 57) are shadowed in U-Boot proper,
> when TFABOOT is not used.
> 
> This choice cause an issue when U-Boot is not executed after SPL,
> so this BSEC initialization is moved in SPL and no more executed in U-Boot,
> so it is still executed only one time.
> 
> After this patch this BSEC initialization is done in FSBL: SPL or TF-A.
> 
> To force this initialization in all the case, the probe of the BSEC
> driver is forced in SPL in the arch st32mp function: spl_board_init().
> 
> Even if today BSEC driver is already probed in STM32MP15x clock driver
> clk_stm32mp1.c because get_cpu_type() is called in
> stm32mp1_get_max_opp_freq() function.
> 
> Reported-by: Alexandru Gagniuc <mr.nuke.me at gmail.com>
> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
> It is updated version of proposed Alexandru patch:
> 
> [v2,06/11] arm: stm32mp: bsec: Update OTP shadow registers in SPL
> http://patchwork.ozlabs.org/project/uboot/patch/20210907235933.2798330-7-mr.nuke.me@gmail.com/
> 
> 
>  arch/arm/mach-stm32mp/bsec.c | 5 ++---
>  arch/arm/mach-stm32mp/cpu.c  | 8 ++++++++
>  2 files changed, 10 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/arm/mach-stm32mp/bsec.c b/arch/arm/mach-stm32mp/bsec.c
> index fe39bd80cf..e517acdd01 100644
> --- a/arch/arm/mach-stm32mp/bsec.c
> +++ b/arch/arm/mach-stm32mp/bsec.c
> @@ -503,10 +503,9 @@ static int stm32mp_bsec_probe(struct udevice *dev)
>  
>  	/*
>  	 * update unlocked shadow for OTP cleared by the rom code
> -	 * only executed in U-Boot proper when TF-A is not used
> +	 * only executed in SPL, it is done in TF-A for TFABOOT
>  	 */
> -
> -	if (!IS_ENABLED(CONFIG_TFABOOT) && !IS_ENABLED(CONFIG_SPL_BUILD)) {
> +	if (IS_ENABLED(CONFIG_SPL_BUILD)) {
>  		plat = dev_get_plat(dev);
>  
>  		for (otp = 57; otp <= BSEC_OTP_MAX_VALUE; otp++)
> diff --git a/arch/arm/mach-stm32mp/cpu.c b/arch/arm/mach-stm32mp/cpu.c
> index eb79f3ffd2..0263ffe96a 100644
> --- a/arch/arm/mach-stm32mp/cpu.c
> +++ b/arch/arm/mach-stm32mp/cpu.c
> @@ -174,7 +174,15 @@ static void dbgmcu_init(void)
>  
>  void spl_board_init(void)
>  {
> +	struct udevice *dev;
> +	int ret;
> +
>  	dbgmcu_init();
> +
> +	/* force probe of BSEC driver to shadow the upper OTP */
> +	ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(stm32mp_bsec), &dev);
> +	if (ret)
> +		log_warning("BSEC probe failed: %d\n", ret);
>  }
>  #endif /* !defined(CONFIG_SPL) || defined(CONFIG_SPL_BUILD) */
>  
> 
Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>
Thanks
Patrice