[PATCH] board: ls1046ardb: force PCI device enumeration

[Camelia Alexandra Groza (OSS)]

> -----Original Message-----
> From: U-Boot <u-boot-bounces at lists.denx.de> On Behalf Of Martin Schiller
> Sent: Wednesday, November 17, 2021 13:59
> To: u-boot at lists.denx.de
> Cc: Martin Schiller <ms at dev.tdt.de>; Priyanka Jain <priyanka.jain at nxp.com>
> Subject: [PATCH] board: ls1046ardb: force PCI device enumeration
> 
> Commit 045ecf899252 ("configs: enable DM_ETH support for LS1046ARDB")
> resulted in the PCI bus no longer being implicitly enumerated.
> 
> However, this is necessary for the fdt pcie fixups to work.
> 
> Therefore, similar to commit 8b6558bd4187 ("board: ls1088ardb:
> transition to DM_ETH"), pci_init() is now called in the board_init()
> routine when CONFIG_DM_ETH is active.
> 
> Signed-off-by: Martin Schiller <ms at dev.tdt.de>
> CC: Priyanka Jain <priyanka.jain at nxp.com>
> ---
>  board/freescale/ls1046ardb/ls1046ardb.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/board/freescale/ls1046ardb/ls1046ardb.c
> b/board/freescale/ls1046ardb/ls1046ardb.c
> index 93ef903f29..d0abfe8869 100644
> --- a/board/freescale/ls1046ardb/ls1046ardb.c
> +++ b/board/freescale/ls1046ardb/ls1046ardb.c
> @@ -93,6 +93,10 @@ int board_init(void)
>  	ppa_init();
>  #endif
> 
> +#if !defined(CONFIG_SYS_EARLY_PCI_INIT) && defined(CONFIG_DM_ETH)
> +	pci_init();
> +#endif
> +
>  	/* invert AQR105 IRQ pins polarity */
>  	out_be32(&scfg->intpcr, AQR105_IRQ_MASK);
> 

Hi

Thank you for the patch. A very similar fix is needed for the ls1043ardb board.
Are you interested to send a patch for that as well?

Acked-by: Camelia Groza <camelia.groza at nxp.com>