[PATCH v5 2/3] mtd: spi-nor-core: Adding different type of command extension in Soft Reset

liao jaime jaimeliao.tw at gmail.com
Fri Nov 26 06:29:46 CET 2021


Hi Tudor

>
> On 11/18/21 12:13 PM, JaimeLiao wrote:
> > EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> >
> > Power-on-Reset is a method to restore flash back to 1S-1S-1S mode from 8D-8D-8D
> > in the begging of probe.
> >
> > Command extension type is not standardized across flash vendors in DTR mode.
> >
> > For suiting different vendor flash devices, adding a flag to seperate types for
> > soft reset on boot.
> >
> > Signed-off-by: JaimeLiao <jaimeliao.tw at gmail.com>
> > ---
> >  drivers/mtd/spi/Kconfig        | 7 +++++++
> >  drivers/mtd/spi/spi-nor-core.c | 7 ++++++-
> >  2 files changed, 13 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/mtd/spi/Kconfig b/drivers/mtd/spi/Kconfig
> > index 1b2ef37e92..9b7d195770 100644
> > --- a/drivers/mtd/spi/Kconfig
> > +++ b/drivers/mtd/spi/Kconfig
> > @@ -97,6 +97,13 @@ config SPI_FLASH_SMART_HWCAPS
> >          can support a type of operation in a much more refined way compared
> >          to using flags like SPI_RX_DUAL, SPI_TX_QUAD, etc.
> >
> > +config SPI_NOR_BOOT_SOFT_RESET_EXT_INVERT
>
> There will be many combinations of reset types and cmd_ext types, better to introduce
> a way to select the reset type and then to select the cmd_ext type so that we avoid
> introducing so many configs/dt props.
>
> I think Pratyush is working to fix this, would you sync with him?
Sure, this configuration is according Pratyush suggestion.

> Check the discussion at
> https://lore.kernel.org/all/20211103234950.202289-4-tudor.ambarus@microchip.com/
>
> Cheers,
> ta
>
> > +       bool "Command extension type is INVERT for Software Reset on boot"
> > +       default n
> > +       help
> > +        Because of SFDP information can not be get before boot.
> > +        So define command extension type is INVERT when Software Reset on boot only.
> > +
> >  config SPI_FLASH_SOFT_RESET
> >         bool "Software Reset support for SPI NOR flashes"
> >         default n
> > diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c
> > index 0a6550984b..2b6947cefc 100644
> > --- a/drivers/mtd/spi/spi-nor-core.c
> > +++ b/drivers/mtd/spi/spi-nor-core.c
> > @@ -3661,7 +3661,12 @@ static int spi_nor_soft_reset(struct spi_nor *nor)
> >         enum spi_nor_cmd_ext ext;
> >
> >         ext = nor->cmd_ext_type;
> > -       nor->cmd_ext_type = SPI_NOR_EXT_REPEAT;
> > +       if (nor->cmd_ext_type == SPI_NOR_EXT_NONE) {
> > +               nor->cmd_ext_type = SPI_NOR_EXT_REPEAT;
> > +#if CONFIG_IS_ENABLED(SPI_NOR_BOOT_SOFT_RESET_EXT_INVERT)
> > +               nor->cmd_ext_type = SPI_NOR_EXT_INVERT;
> > +#endif /* SPI_NOR_BOOT_SOFT_RESET_EXT_INVERT */
> > +       }
> >
> >         op = (struct spi_mem_op)SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_SRSTEN, 0),
> >                         SPI_MEM_OP_NO_DUMMY,
> > --
> > 2.17.1
> >
>


More information about the U-Boot mailing list