[RESEND RFC PATCH 09/10] FWU: Add support for FWU Multi Bank Update feature
Heinrich Schuchardt
xypron.glpk at gmx.de
Fri Nov 26 13:55:43 CET 2021
On 11/25/21 08:13, Sughosh Ganu wrote:
> The FWU Multi Bank Update feature supports updation of firmware images
> to one of multiple sets(also called banks) of images. The firmware
> images are clubbed together in banks, with the system booting images
> from the active bank. Information on the images such as which bank
> they belong to is stored as part of the metadata structure, which is
> stored on the same storage media as the firmware images on a dedicated
> partition.
>
> At the time of update, the metadata is read to identify the bank to
> which the images need to be flashed(update bank). On a successful
> update, the metadata is modified to set the updated bank as active
> bank to subsequently boot from.
>
> Signed-off-by: Sughosh Ganu <sughosh.ganu at linaro.org>
> ---
> include/fwu_metadata.h | 10 ++
> lib/Kconfig | 32 ++++++
> lib/Makefile | 1 +
> lib/efi_loader/efi_capsule.c | 190 ++++++++++++++++++++++++++++++++++-
> lib/fwu_updates/Makefile | 11 ++
> lib/fwu_updates/fwu.c | 29 +++++-
> 6 files changed, 269 insertions(+), 4 deletions(-)
> create mode 100644 lib/fwu_updates/Makefile
>
> diff --git a/include/fwu_metadata.h b/include/fwu_metadata.h
> index 02897f33a8..2d276a019a 100644
> --- a/include/fwu_metadata.h
> +++ b/include/fwu_metadata.h
> @@ -106,7 +106,16 @@ struct fwu_metadata_ops {
> EFI_GUID(0x8a7a84a0, 0x8387, 0x40f6, 0xab, 0x41, \
> 0xa8, 0xb9, 0xa5, 0xa6, 0x0d, 0x23)
>
> +#define FWU_OS_REQUEST_FW_REVERT_GUID \
> + EFI_GUID(0xacd58b4b, 0xc0e8, 0x475f, 0x99, 0xb5, \
> + 0x6b, 0x3f, 0x7e, 0x07, 0xaa, 0xf0)
> +
> +#define FWU_OS_REQUEST_FW_ACCEPT_GUID \
> + EFI_GUID(0x0c996046, 0xbcc0, 0x4d04, 0x85, 0xec, \
> + 0xe1, 0xfc, 0xed, 0xf1, 0xc6, 0xf8)
> +
> #define FWU_METADATA_VERSION 0x1
> +#define FWU_IMAGE_ACCEPTED 0x1
>
> extern struct fwu_metadata_ops fwu_gpt_blk_ops;
>
> @@ -126,5 +135,6 @@ int fwu_plat_get_update_index(u32 *update_idx);
> int fwu_plat_get_blk_desc(struct blk_desc **desc);
> void fwu_plat_get_bootidx(void *boot_idx);
> int fwu_boottime_checks(void);
> +int fwu_trial_state_ctr_start(void);
>
> #endif /* _FWU_METADATA_H_ */
> diff --git a/lib/Kconfig b/lib/Kconfig
> index 807a4c6ade..7cb306317c 100644
> --- a/lib/Kconfig
> +++ b/lib/Kconfig
> @@ -835,3 +835,35 @@ config PHANDLE_CHECK_SEQ
> When there are multiple device tree nodes with same name,
> enable this config option to distinguish them using
> phandles in fdtdec_get_alias_seq() function.
> +
> +config FWU_MULTI_BANK_UPDATE
> + bool "Enable FWU Multi Bank Update Feature"
Why do we need a configuration variable? Having 1 bank is just a special
case which should not use separate code.
> + depends on EFI_HAVE_CAPSULE_SUPPORT
> + select PARTITION_TYPE_GUID
> + select EFI_SETUP_EARLY
> + help
> + Feature for updating firmware images on platforms having
> + multiple banks(copies) of the firmware images. One of the
> + bank is selected for updating all the firmware components
> +
> +config FWU_NUM_BANKS
> + int "Number of Banks defined by the platform"
> + depends on FWU_MULTI_BANK_UPDATE
This should default to 1.
> + help
> + Define the number of banks of firmware images on a platform
> +
> +config FWU_NUM_IMAGES_PER_BANK
> + int "Number of firmware images per bank"
> + depends on FWU_MULTI_BANK_UPDATE
This dependency makes no sense. Even if I have one bank I can have
multiple images.
Why should this configuration variable be needed?
The dfu variables and the capsule define how many images are updated.
> + help
> + Define the number of firmware images per bank. This value
> + should be the same for all the banks.
> +
> +config FWU_TRIAL_STATE_CNT
> + int "Number of times system boots in Trial State"
> + depends on FWU_MULTI_BANK_UPDATE
> + default 3
> + help
> + With FWU Multi Bank Update feature enabled, number of times
> + the platform is allowed to boot in Trial State after an
> + update.
Do you mean:
"This is the number of boots in trial state before falling back to the
last successfully used bank."
Best regards
Heinrich
> diff --git a/lib/Makefile b/lib/Makefile
> index 5ddbc77ed6..bc5c1e22fc 100644
> --- a/lib/Makefile
> +++ b/lib/Makefile
> @@ -9,6 +9,7 @@ obj-$(CONFIG_EFI) += efi/
> obj-$(CONFIG_EFI_LOADER) += efi_driver/
> obj-$(CONFIG_EFI_LOADER) += efi_loader/
> obj-$(CONFIG_CMD_BOOTEFI_SELFTEST) += efi_selftest/
> +obj-$(CONFIG_FWU_MULTI_BANK_UPDATE) += fwu_updates/
> obj-$(CONFIG_LZMA) += lzma/
> obj-$(CONFIG_BZIP2) += bzip2/
> obj-$(CONFIG_TIZEN) += tizen/
> diff --git a/lib/efi_loader/efi_capsule.c b/lib/efi_loader/efi_capsule.c
> index 502bcfca6e..40b9e87e92 100644
> --- a/lib/efi_loader/efi_capsule.c
> +++ b/lib/efi_loader/efi_capsule.c
> @@ -14,6 +14,7 @@
> #include <env.h>
> #include <fdtdec.h>
> #include <fs.h>
> +#include <fwu_metadata.h>
> #include <malloc.h>
> #include <mapmem.h>
> #include <sort.h>
> @@ -30,6 +31,13 @@ static const efi_guid_t efi_guid_firmware_management_capsule_id =
> EFI_FIRMWARE_MANAGEMENT_CAPSULE_ID_GUID;
> const efi_guid_t efi_guid_firmware_management_protocol =
> EFI_FIRMWARE_MANAGEMENT_PROTOCOL_GUID;
> +const efi_guid_t fwu_guid_os_request_fw_revert =
> + FWU_OS_REQUEST_FW_REVERT_GUID;
> +const efi_guid_t fwu_guid_os_request_fw_accept =
> + FWU_OS_REQUEST_FW_ACCEPT_GUID;
> +
> +__maybe_unused static u32 update_index;
> +__maybe_unused static bool capsule_update;
>
> #ifdef CONFIG_EFI_CAPSULE_ON_DISK
> /* for file system access */
> @@ -403,10 +411,13 @@ static efi_status_t efi_capsule_update_firmware(
> void *image_binary, *vendor_code;
> efi_handle_t *handles;
> efi_uintn_t no_handles;
> - int item;
> + int item, alt_no;
> struct efi_firmware_management_protocol *fmp;
> u16 *abort_reason;
> + efi_guid_t image_type_id;
> efi_status_t ret = EFI_SUCCESS;
> + int status;
> + u8 image_index;
>
> /* sanity check */
> if (capsule_data->header_size < sizeof(*capsule) ||
> @@ -481,8 +492,36 @@ static efi_status_t efi_capsule_update_firmware(
> goto out;
> }
>
> + if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE)) {
> + /*
> + * Based on the value of update_image_type_id,
> + * derive the alt number value. This will be
> + * passed as update_image_index to the
> + * set_image function.
> + */
> + image_type_id = image->update_image_type_id;
> + status = fwu_get_image_alt_num(image_type_id,
> + update_index,
> + &alt_no);
> + if (status < 0) {
> + log_err("Unable to get the alt no for the image type %pUl\n",
> + &image_type_id);
> + if (status == -ENODEV || status == -EIO)
> + ret = EFI_DEVICE_ERROR;
> + else if (status == -ENOMEM)
> + ret = EFI_OUT_OF_RESOURCES;
> + else if (status == -ERANGE || status == -EINVAL)
> + ret = EFI_INVALID_PARAMETER;
> + goto out;
> + }
> + log_debug("alt_no %u for Image Type Id %pUl\n",
> + alt_no, &image_type_id);
> + image_index = alt_no;
> + } else {
> + image_index = image->update_image_index;
> + }
> abort_reason = NULL;
> - ret = EFI_CALL(fmp->set_image(fmp, image->update_image_index,
> + ret = EFI_CALL(fmp->set_image(fmp, image_index,
> image_binary,
> image_binary_size,
> vendor_code, NULL,
> @@ -493,6 +532,24 @@ static efi_status_t efi_capsule_update_firmware(
> efi_free_pool(abort_reason);
> goto out;
> }
> +
> + if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE)) {
> + status = fwu_clear_accept_image(&image_type_id,
> + update_index);
> + if (status < 0) {
> + log_err("Unable to clear the accept bit for the image %pUl\n",
> + &image_type_id);
> + if (status == -ENODEV || status == -EIO)
> + ret = EFI_DEVICE_ERROR;
> + else if (status == -ENOMEM)
> + ret = EFI_OUT_OF_RESOURCES;
> + else if (status == -ERANGE || status == -EINVAL)
> + ret = EFI_INVALID_PARAMETER;
> + goto out;
> + }
> + log_debug("Cleared out accepted bit for Image %pUl\n", &image_type_id);
> + }
> +
> }
>
> out:
> @@ -527,6 +584,9 @@ efi_status_t EFIAPI efi_update_capsule(
> u64 scatter_gather_list)
> {
> struct efi_capsule_header *capsule;
> + efi_guid_t *image_guid;
> + u32 active_idx;
> + int status;
> unsigned int i;
> efi_status_t ret;
>
> @@ -538,6 +598,16 @@ efi_status_t EFIAPI efi_update_capsule(
> goto out;
> }
>
> + if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE)) {
> + /* First obtain the update_index from the platform */
> + status = fwu_plat_get_update_index(&update_index);
> + if (status < 0) {
> + log_err("Failed to get the FWU update_index value\n");
> + ret = EFI_DEVICE_ERROR;
> + goto out;
> + }
> + }
> +
> ret = EFI_SUCCESS;
> for (i = 0, capsule = *capsule_header_array; i < capsule_count;
> i++, capsule = *(++capsule_header_array)) {
> @@ -553,6 +623,55 @@ efi_status_t EFIAPI efi_update_capsule(
> if (!guidcmp(&capsule->capsule_guid,
> &efi_guid_firmware_management_capsule_id)) {
> ret = efi_capsule_update_firmware(capsule);
> + capsule_update = true;
> + } else if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE)) {
> + capsule_update = false;
> + if (!guidcmp(&capsule->capsule_guid,
> + &fwu_guid_os_request_fw_revert)) {
> + /*
> + * One of the previously updated image has
> + * failed the OS acceptance test. OS has
> + * requested to revert back to the earlier
> + * boot index
> + */
> + status = fwu_revert_boot_index(&active_idx);
> + if (status < 0) {
> + log_err("Failed to revert the FWU boot index\n");
> + if (status == -ENODEV ||
> + status == -ERANGE ||
> + status == -EIO)
> + ret = EFI_DEVICE_ERROR;
> + else if (status == -EINVAL)
> + ret = EFI_INVALID_PARAMETER;
> + else if (status == -ENOMEM)
> + ret = EFI_OUT_OF_RESOURCES;
> + } else {
> + ret = EFI_SUCCESS;
> + log_err("Reverted the FWU active_index to %u. Recommend rebooting the system\n",
> + active_idx);
> + }
> + } else if (!guidcmp(&capsule->capsule_guid,
> + &fwu_guid_os_request_fw_accept)) {
> + /*
> + * Image accepted by the OS. Set the acceptance
> + * status for the image.
> + */
> + image_guid = (void *)(char *)capsule +
> + capsule->header_size;
> + status = fwu_accept_image(image_guid);
> + if (status < 0) {
> + if (status == -ENODEV ||
> + status == -ERANGE ||
> + status == -EIO)
> + ret = EFI_DEVICE_ERROR;
> + else if (status == -EINVAL)
> + ret = EFI_INVALID_PARAMETER;
> + else if (status == -ENOMEM)
> + ret = EFI_OUT_OF_RESOURCES;
> + } else {
> + ret = EFI_SUCCESS;
> + }
> + }
> } else {
> log_err("Unsupported capsule type: %pUl\n",
> &capsule->capsule_guid);
> @@ -563,6 +682,36 @@ efi_status_t EFIAPI efi_update_capsule(
> goto out;
> }
>
> + /*
> + * Update the metadata once all the capsules have
> + * been updated. This is done only for the Runtime
> + * capsule update service.
> + * The update_index value now gets written to the
> + * active_index and the update_index value also
> + * gets updated.
> + * For the capsule-on-disk feature, the updation
> + * of the metadata happens in efi_launch_capsules
> + */
> + if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE) &&
> + !IS_ENABLED(CONFIG_EFI_CAPSULE_ON_DISK)) {
> + status = fwu_update_active_index(update_index);
> + if (status < 0) {
> + log_err("Failed to update FWU metadata index values\n");
> + if (status == -EINVAL || status == -ERANGE)
> + ret = EFI_INVALID_PARAMETER;
> + else if (status == -ENODEV || status == -EIO)
> + ret = EFI_DEVICE_ERROR;
> + else if (status == -ENOMEM)
> + ret = EFI_OUT_OF_RESOURCES;
> + } else {
> + status = fwu_trial_state_ctr_start();
> + if (status < 0)
> + ret = EFI_DEVICE_ERROR;
> + else
> + ret = EFI_SUCCESS;
> + }
> + }
> +
> if (IS_ENABLED(CONFIG_EFI_ESRT)) {
> /* Rebuild the ESRT to reflect any updated FW images. */
> ret = efi_esrt_populate();
> @@ -1075,8 +1224,10 @@ efi_status_t efi_launch_capsules(void)
> {
> struct efi_capsule_header *capsule = NULL;
> u16 **files;
> + int status;
> unsigned int nfiles, index, i;
> efi_status_t ret;
> + bool update_status = true;
>
> if (!check_run_capsules())
> return EFI_SUCCESS;
> @@ -1104,9 +1255,11 @@ efi_status_t efi_launch_capsules(void)
> ret = efi_capsule_read_file(files[i], &capsule);
> if (ret == EFI_SUCCESS) {
> ret = EFI_CALL(efi_update_capsule(&capsule, 1, 0));
> - if (ret != EFI_SUCCESS)
> + if (ret != EFI_SUCCESS) {
> log_err("Applying capsule %ls failed\n",
> files[i]);
> + update_status = false;
> + }
>
> /* create CapsuleXXXX */
> set_capsule_result(index, capsule, ret);
> @@ -1114,6 +1267,7 @@ efi_status_t efi_launch_capsules(void)
> free(capsule);
> } else {
> log_err("Reading capsule %ls failed\n", files[i]);
> + update_status = false;
> }
> /* delete a capsule either in case of success or failure */
> ret = efi_capsule_delete_file(files[i]);
> @@ -1121,7 +1275,37 @@ efi_status_t efi_launch_capsules(void)
> log_err("Deleting capsule %ls failed\n",
> files[i]);
> }
> +
> efi_capsule_scan_done();
> + if (IS_ENABLED(CONFIG_FWU_MULTI_BANK_UPDATE)) {
> + if (update_status == true && capsule_update == true) {
> + /*
> + * All the capsules have been updated successfully,
> + * update the FWU metadata.
> + */
> + log_debug("Update Complete. Now updating active_index to %u\n",
> + update_index);
> + status = fwu_update_active_index(update_index);
> + if (status < 0) {
> + log_err("Failed to update FWU metadata index values\n");
> + if (status == -EINVAL || status == -ERANGE)
> + ret = EFI_INVALID_PARAMETER;
> + else if (status == -ENODEV || status == -EIO)
> + ret = EFI_DEVICE_ERROR;
> + else if (status == -ENOMEM)
> + ret = EFI_OUT_OF_RESOURCES;
> + } else {
> + log_debug("Successfully updated the active_index\n");
> + status = fwu_trial_state_ctr_start();
> + if (status < 0)
> + ret = EFI_DEVICE_ERROR;
> + else
> + ret = EFI_SUCCESS;
> + }
> + } else if (capsule_update == true && update_status == false) {
> + log_err("All capsules were not updated. Not updating metadata\n");
> + }
> + }
>
> for (i = 0; i < nfiles; i++)
> free(files[i]);
> diff --git a/lib/fwu_updates/Makefile b/lib/fwu_updates/Makefile
> new file mode 100644
> index 0000000000..f6fa8290c1
> --- /dev/null
> +++ b/lib/fwu_updates/Makefile
> @@ -0,0 +1,11 @@
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# Copyright (c) 2021, Linaro Limited
> +#
> +
> +obj-$(CONFIG_FWU_MULTI_BANK_UPDATE) += fwu_metadata.o
> +obj-$(CONFIG_FWU_MULTI_BANK_UPDATE) += fwu.o
> +
> +ifdef CONFIG_EFI_PARTITION
> +obj-$(CONFIG_FWU_MULTI_BANK_UPDATE) += fwu_metadata_gpt_blk.o
> +endif
> diff --git a/lib/fwu_updates/fwu.c b/lib/fwu_updates/fwu.c
> index 2e1904b912..bbd3dc249f 100644
> --- a/lib/fwu_updates/fwu.c
> +++ b/lib/fwu_updates/fwu.c
> @@ -45,7 +45,7 @@ static int fwu_trial_state_check(void)
> log_info("System booting in Trial State\n");
> var_attributes = EFI_VARIABLE_NON_VOLATILE |
> EFI_VARIABLE_BOOTSERVICE_ACCESS |
> - EFI_VARIABLE_RUNTIME_ACCESS,
> + EFI_VARIABLE_RUNTIME_ACCESS;
> status = efi_get_variable_int(L"TrialStateCtr",
> &efi_global_variable_guid,
> &var_attributes,
> @@ -99,6 +99,33 @@ out:
> return ret;
> }
>
> +int fwu_trial_state_ctr_start(void)
> +{
> + int ret;
> + u32 var_attributes;
> + efi_status_t status;
> + efi_uintn_t var_size;
> + u16 trial_state_ctr;
> +
> + var_size = (efi_uintn_t)sizeof(trial_state_ctr);
> + var_attributes = EFI_VARIABLE_NON_VOLATILE |
> + EFI_VARIABLE_BOOTSERVICE_ACCESS |
> + EFI_VARIABLE_RUNTIME_ACCESS;
> +
> + trial_state_ctr = ret = 0;
> + status = efi_set_variable_int(L"TrialStateCtr",
> + &efi_global_variable_guid,
> + var_attributes,
> + var_size,
> + &trial_state_ctr, false);
> + if (status != EFI_SUCCESS) {
> + log_err("Unable to increment TrialStateCtr variable\n");
> + ret = -1;
> + }
> +
> + return ret;
> +}
> +
> int fwu_boottime_checks(void)
> {
> int ret;
>
More information about the U-Boot
mailing list