[PATCH u-boot-marvell v2 9/9] arm: mvebu: spl: Fix 100 column exceeds

Marek Behún kabel at kernel.org
Fri Nov 26 15:37:38 CET 2021


From: Marek Behún <marek.behun at nic.cz>

Fix 100 column exceeds in arch/arm/mach-mvebu/spl.c.

Signed-off-by: Marek Behún <marek.behun at nic.cz>
---
 arch/arm/mach-mvebu/spl.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c
index 7dbe8eeba3..7450e1e3da 100644
--- a/arch/arm/mach-mvebu/spl.c
+++ b/arch/arm/mach-mvebu/spl.c
@@ -47,7 +47,8 @@
 #if defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR) && CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR != 0
 #error CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR must be set to 0
 #endif
-#if defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET) && CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET != 0
+#if defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET) && \
+    CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET != 0
 #error CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET must be set to 0
 #endif
 #endif
@@ -58,7 +59,8 @@
  * set to 1. Otherwise U-Boot SPL would not be able to load U-Boot proper.
  */
 #ifdef CONFIG_SPL_SATA
-#if !defined(CONFIG_SPL_SATA_RAW_U_BOOT_USE_SECTOR) || !defined(CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR) || CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR != 1
+#if !defined(CONFIG_SPL_SATA_RAW_U_BOOT_USE_SECTOR) || \
+    !defined(CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR) || CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR != 1
 #error CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR must be set to 1
 #endif
 #endif
-- 
2.32.0



More information about the U-Boot mailing list