[EXT] Re: [PATCH v4 01/16] crypto/fsl: Add support for CAAM Job ring driver model

Gaurav Jain gaurav.jain at nxp.com
Mon Nov 29 08:25:45 CET 2021


Hello Simon

> -----Original Message-----
> From: Simon Glass <sjg at chromium.org>
> Sent: Thursday, November 25, 2021 5:42 AM
> To: Gaurav Jain <gaurav.jain at nxp.com>
> Cc: U-Boot Mailing List <u-boot at lists.denx.de>; Stefano Babic
> <sbabic at denx.de>; Fabio Estevam <festevam at gmail.com>; Peng Fan
> <peng.fan at nxp.com>; Priyanka Jain <priyanka.jain at nxp.com>; Ye Li
> <ye.li at nxp.com>; Horia Geanta <horia.geanta at nxp.com>; Ji Luo
> <ji.luo at nxp.com>; Franck Lenormand <franck.lenormand at nxp.com>; Silvano Di
> Ninno <silvano.dininno at nxp.com>; Sahil Malhotra <sahil.malhotra at nxp.com>;
> Pankaj Gupta <pankaj.gupta at nxp.com>; Varun Sethi <V.Sethi at nxp.com>; dl-
> uboot-imx <uboot-imx at nxp.com>; Shengzhou Liu <shengzhou.liu at nxp.com>;
> Mingkai Hu <mingkai.hu at nxp.com>; Rajesh Bhagat <rajesh.bhagat at nxp.com>;
> Meenakshi Aggarwal <meenakshi.aggarwal at nxp.com>; Wasim Khan
> <wasim.khan at nxp.com>; Alison Wang <alison.wang at nxp.com>; Pramod
> Kumar <pramod.kumar_1 at nxp.com>; Andy Tang <andy.tang at nxp.com>;
> Adrian Alonso <adrian.alonso at nxp.com>; Vladimir Oltean <olteanv at gmail.com>
> Subject: Re: [EXT] Re: [PATCH v4 01/16] crypto/fsl: Add support for CAAM Job
> ring driver model
> 
> Caution: EXT Email
> 
> Hi Gaurav,
> 
> On Mon, 8 Nov 2021 at 02:30, Gaurav Jain <gaurav.jain at nxp.com> wrote:
> >
> > Hello Simon
> >
> > > -----Original Message-----
> > > From: Simon Glass <sjg at chromium.org>
> > > Sent: Tuesday, November 2, 2021 8:26 PM
> > > To: Gaurav Jain <gaurav.jain at nxp.com>
> > > Cc: U-Boot Mailing List <u-boot at lists.denx.de>; Stefano Babic
> > > <sbabic at denx.de>; Fabio Estevam <festevam at gmail.com>; Peng Fan
> > > <peng.fan at nxp.com>; Priyanka Jain <priyanka.jain at nxp.com>; Ye Li
> > > <ye.li at nxp.com>; Horia Geanta <horia.geanta at nxp.com>; Ji Luo
> > > <ji.luo at nxp.com>; Franck Lenormand <franck.lenormand at nxp.com>;
> > > Silvano Di Ninno <silvano.dininno at nxp.com>; Sahil Malhotra
> > > <sahil.malhotra at nxp.com>; Pankaj Gupta <pankaj.gupta at nxp.com>; Varun
> > > Sethi <V.Sethi at nxp.com>; dl- uboot-imx <uboot-imx at nxp.com>;
> > > Shengzhou Liu <shengzhou.liu at nxp.com>; Mingkai Hu
> > > <mingkai.hu at nxp.com>; Rajesh Bhagat <rajesh.bhagat at nxp.com>;
> > > Meenakshi Aggarwal <meenakshi.aggarwal at nxp.com>; Wasim Khan
> > > <wasim.khan at nxp.com>; Alison Wang <alison.wang at nxp.com>; Pramod
> > > Kumar <pramod.kumar_1 at nxp.com>; Andy Tang <andy.tang at nxp.com>;
> > > Adrian Alonso <adrian.alonso at nxp.com>; Vladimir Oltean
> > > <olteanv at gmail.com>
> > > Subject: [EXT] Re: [PATCH v4 01/16] crypto/fsl: Add support for CAAM
> > > Job ring driver model
> > >
> > > Caution: EXT Email
> > >
> > > Hi Gaurav,
> > >
> > > On Tue, 26 Oct 2021 at 00:56, Gaurav Jain <gaurav.jain at nxp.com> wrote:
> > > >
> > > > added device tree support for job ring driver.
> > > > sec is initialized based on job ring information processed from
> > > > device tree.
> > > >
> > > > Signed-off-by: Gaurav Jain <gaurav.jain at nxp.com>
> > > > Reviewed-by: Ye Li <ye.li at nxp.com>
> > > > ---
> > > >  cmd/Kconfig                 |   1 +
> > > >  drivers/crypto/fsl/Kconfig  |   7 +
> > > >  drivers/crypto/fsl/Makefile |   4 +-
> > > >  drivers/crypto/fsl/jr.c     | 318 ++++++++++++++++++++++++------------
> > > >  drivers/crypto/fsl/jr.h     |  14 ++
> > > >  5 files changed, 234 insertions(+), 110 deletions(-)
> > >
> > > You should not have CONFIG_ARCH_IMX8 in a driver. Things like that
> > > should be handled by using a different compatible string. Also please use the
> livetree API.
> > >
> > > I asked about the use of MISC as a uclass earlier. It seems that
> > > this device provides random numbers and perhaps hashing? It is hard
> > > to know since I am not sure where the documentation is in this
> > > series. It seems odd to be modelled as a MISC device. My
> > > understanding is that there are problems with the size in SPL if a different
> UCLASS is used.
> > > Is that correct? I asked about of-platdata but I didn't see any comment on
> that.
> > >
> > > This does seem to be a significant clean-up even as it is, though,
> > > so these thoughts could be looked at after this series is applied.
> > >
> > Kernel dtb uses single compatible string for all imx platforms.
> > Adding a different compatible string will introduce a difference with kernel dts
> nodes.
> 
> That sounds like a bug?
In jr.c,  for IMX8 we need to do only Jr initialization and skipping RNG instantiation as it is already done.
This is achieved using CONFIG_ARCH_IMX8. Are you suggesting to use different macro?

> 
> > Will update the driver with livetree API in next version of this series.
> >
> > RNG instantiation is done as part of caam initialization. hwrng_generate()
> function is added by me to generate random number via caam rng.
> > I am not sure where to document but cover letter was updated.
> >
> > using OF_PLATDATA also have memory issues in SPL. It needs 15KB more
> memory compared to no driver model in SPL. We don't have enough OCRAM on
> few platforms.
> > SPL size issue is not caused by MISC UCLASS but it is due to limited OCRAM.
> 
> That's a very large increase. Can you point me to the tree which enables that so I
> can take a look? With of-platadata the overhead should be much smaller than
> that, perhaps 4KB.

1. Tried imx8mm_evk_defconfig with downstream uboot, which results in 15K increase in u-boot-spl.bin  when enable OF_PLATDATA.
2. then tried imx8mq_evk_defconfig with upstream. Lot of build errors reported with OF_PLATDATA. Just commented and build, which resulted in 11K increase in u-boot-spl.bin(77K to 88K).

Regards
Gaurav Jain
> 
> >
> > I agree to your suggestion for any change/cleanup after the series is applied.
> 
> Regards,
> Simon


More information about the U-Boot mailing list