[PATCH u-boot-marvell v2 7/9] arm: mvebu: spl: Use preferred types u8/u16/u32 instead of uintN_t

[Stefan Roese]

On 11/26/21 15:37, Marek Behún wrote:
> From: Marek Behún <marek.behun at nic.cz>
> 
> Checkpatch warns about using uint32/16/8_t instead of u32/16/8.
> 
> Use the preferred types.
> 
> Signed-off-by: Marek Behún <marek.behun at nic.cz>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
>   arch/arm/mach-mvebu/spl.c | 34 +++++++++++++++++-----------------
>   1 file changed, 17 insertions(+), 17 deletions(-)
> 
> diff --git a/arch/arm/mach-mvebu/spl.c b/arch/arm/mach-mvebu/spl.c
> index 8c8cbc833f..97d7aea179 100644
> --- a/arch/arm/mach-mvebu/spl.c
> +++ b/arch/arm/mach-mvebu/spl.c
> @@ -74,23 +74,23 @@
>   
>   /* Structure of the main header, version 1 (Armada 370/XP/375/38x/39x) */
>   struct kwbimage_main_hdr_v1 {
> -	uint8_t  blockid;               /* 0x0       */
> -	uint8_t  flags;                 /* 0x1       */
> -	uint16_t nandpagesize;          /* 0x2-0x3   */
> -	uint32_t blocksize;             /* 0x4-0x7   */
> -	uint8_t  version;               /* 0x8       */
> -	uint8_t  headersz_msb;          /* 0x9       */
> -	uint16_t headersz_lsb;          /* 0xA-0xB   */
> -	uint32_t srcaddr;               /* 0xC-0xF   */
> -	uint32_t destaddr;              /* 0x10-0x13 */
> -	uint32_t execaddr;              /* 0x14-0x17 */
> -	uint8_t  options;               /* 0x18      */
> -	uint8_t  nandblocksize;         /* 0x19      */
> -	uint8_t  nandbadblklocation;    /* 0x1A      */
> -	uint8_t  reserved4;             /* 0x1B      */
> -	uint16_t reserved5;             /* 0x1C-0x1D */
> -	uint8_t  ext;                   /* 0x1E      */
> -	uint8_t  checksum;              /* 0x1F      */
> +	u8  blockid;               /* 0x0       */
> +	u8  flags;                 /* 0x1       */
> +	u16 nandpagesize;          /* 0x2-0x3   */
> +	u32 blocksize;             /* 0x4-0x7   */
> +	u8  version;               /* 0x8       */
> +	u8  headersz_msb;          /* 0x9       */
> +	u16 headersz_lsb;          /* 0xA-0xB   */
> +	u32 srcaddr;               /* 0xC-0xF   */
> +	u32 destaddr;              /* 0x10-0x13 */
> +	u32 execaddr;              /* 0x14-0x17 */
> +	u8  options;               /* 0x18      */
> +	u8  nandblocksize;         /* 0x19      */
> +	u8  nandbadblklocation;    /* 0x1A      */
> +	u8  reserved4;             /* 0x1B      */
> +	u16 reserved5;             /* 0x1C-0x1D */
> +	u8  ext;                   /* 0x1E      */
> +	u8  checksum;              /* 0x1F      */
>   } __packed;
>   
>   #ifdef CONFIG_SPL_MMC
> 

Viele Grüße,
Stefan Roese

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de