[PATCH] board: stm32mp1: add support of nor1 device in dfu command

Patrice CHOTARD patrice.chotard at foss.st.com
Tue Nov 30 10:57:04 CET 2021


Hi Patrick

On 11/25/21 11:54 AM, Patrick Delaunay wrote:
> Add support of mtd backend for nor1 when this device is present on the
> board, on STM32MP157C-EV1 for example, as the support of several MTD
> spi-nor instance are now supported with commit b7f060565e31 ("mtd:
> spi-nor: allow registering multiple MTDs when DM is enabled").
> 
> Signed-off-by: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
> 
>  board/st/common/stm32mp_dfu.c |  4 ++++
>  doc/board/st/stm32mp1.rst     | 18 ++++++++++--------
>  2 files changed, 14 insertions(+), 8 deletions(-)
> 
> diff --git a/board/st/common/stm32mp_dfu.c b/board/st/common/stm32mp_dfu.c
> index 00d1fb8f59..a3f0da5b5b 100644
> --- a/board/st/common/stm32mp_dfu.c
> +++ b/board/st/common/stm32mp_dfu.c
> @@ -132,6 +132,10 @@ void set_dfu_alt_info(char *interface, char *devstr)
>  			mtd = get_mtd_device_nm("nor0");
>  			if (!IS_ERR_OR_NULL(mtd))
>  				board_get_alt_info_mtd(mtd, buf);
> +
> +			mtd = get_mtd_device_nm("nor1");
> +			if (!IS_ERR_OR_NULL(mtd))
> +				board_get_alt_info_mtd(mtd, buf);
>  		}
>  
>  		mtd = get_mtd_device_nm("nand0");
> diff --git a/doc/board/st/stm32mp1.rst b/doc/board/st/stm32mp1.rst
> index 42bb94148d..0c5d3a90f0 100644
> --- a/doc/board/st/stm32mp1.rst
> +++ b/doc/board/st/stm32mp1.rst
> @@ -645,16 +645,18 @@ On EV1 board, booting from SD card, without OP-TEE_::
>    dev: eMMC alt: 15 name: mmc1_rootfs layout: RAW_ADDR
>    dev: eMMC alt: 16 name: mmc1_userfs layout: RAW_ADDR
>    dev: MTD alt: 17 name: nor0 layout: RAW_ADDR
> -  dev: MTD alt: 18 name: nand0 layout: RAW_ADDR
> -  dev: VIRT alt: 19 name: OTP layout: RAW_ADDR
> -  dev: VIRT alt: 20 name: PMIC layout: RAW_ADDR
> +  dev: MTD alt: 18 name: nor1 layout: RAW_ADDR
> +  dev: MTD alt: 19 name: nand0 layout: RAW_ADDR
> +  dev: VIRT alt: 20 name: OTP layout: RAW_ADDR
> +  dev: VIRT alt: 21 name: PMIC layout: RAW_ADDR
>  
>  All the supported device are exported for dfu-util tool::
>  
>    $> dfu-util -l
> -  Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=20, name="PMIC", serial="002700333338511934383330"
> -  Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=19, name="OTP", serial="002700333338511934383330"
> -  Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=18, name="nand0", serial="002700333338511934383330"
> +  Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=21, name="PMIC", serial="002700333338511934383330"
> +  Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=20, name="OTP", serial="002700333338511934383330"
> +  Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=19, name="nand0", serial="002700333338511934383330"
> +  Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=18, name="nor1", serial="002700333338511934383330"
>    Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=17, name="nor0", serial="002700333338511934383330"
>    Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=16, name="mmc1_userfs", serial="002700333338511934383330"
>    Found DFU: [0483:df11] ver=9999, devnum=99, cfg=1, intf=0, alt=15, name="mmc1_rootfs", serial="002700333338511934383330"
> @@ -705,12 +707,12 @@ You can update the boot device:
>  When the board is booting for nor0 or nand0,
>  only the MTD partition on the boot devices are available, for example:
>  
> -- NOR (nor0 = alt 20) & NAND (nand0 = alt 26) ::
> +- NOR (nor0 = alt 20, nor1 = alt 26) & NAND (nand0 = alt 27) :
>  
>    $> dfu-util -d 0483:5720 -a 21 -D tf-a-stm32mp157c-ev1.stm32
>    $> dfu-util -d 0483:5720 -a 22 -D tf-a-stm32mp157c-ev1.stm32
>    $> dfu-util -d 0483:5720 -a 23 -D fip-stm32mp157c-ev1.bin
> -  $> dfu-util -d 0483:5720 -a 27 -D st-image-weston-openstlinux-weston-stm32mp1_nand_4_256_multivolume.ubi
> +  $> dfu-util -d 0483:5720 -a 28 -D st-image-weston-openstlinux-weston-stm32mp1_nand_4_256_multivolume.ubi
>  
>  - NAND (nand0 = alt 21)::
>  
> 

Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>
Thanks
Patrice


More information about the U-Boot mailing list