[PATCH v6 06/15] i.MX7: Enable Job ring driver model in U-Boot.

[Gaurav Jain]

i.MX7D - added support for JR driver model.

removed sec_init() call, sec is initialized based on
job ring information processed from device tree.

Signed-off-by: Gaurav Jain <gaurav.jain at nxp.com>
Reviewed-by: Ye Li <ye.li at nxp.com>
---
 arch/arm/Kconfig              |  2 +-
 arch/arm/mach-imx/mx7/Kconfig |  3 +++
 arch/arm/mach-imx/mx7/soc.c   | 11 +++++++----
 3 files changed, 11 insertions(+), 5 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 550f884077..516e1b5a8f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -883,7 +883,7 @@ config ARCH_MX7
 	select CPU_V7A
 	select GPIO_EXTRA_HEADER
 	select MACH_IMX
-	select SYS_FSL_HAS_SEC if IMX_HAB
+	select SYS_FSL_HAS_SEC
 	select SYS_FSL_SEC_COMPAT_4
 	select SYS_FSL_SEC_LE
 	imply BOARD_EARLY_INIT_F
diff --git a/arch/arm/mach-imx/mx7/Kconfig b/arch/arm/mach-imx/mx7/Kconfig
index 0cad825287..d8f748a544 100644
--- a/arch/arm/mach-imx/mx7/Kconfig
+++ b/arch/arm/mach-imx/mx7/Kconfig
@@ -68,6 +68,9 @@ config TARGET_MX7DSABRESD
 	select DM_THERMAL
 	select MX7D
 	imply CMD_DM
+	select FSL_CAAM
+	select FSL_BLOB
+	select MISC
 
 config TARGET_PICO_IMX7D
 	bool "pico-imx7d"
diff --git a/arch/arm/mach-imx/mx7/soc.c b/arch/arm/mach-imx/mx7/soc.c
index 21690072e1..6c991a6cb1 100644
--- a/arch/arm/mach-imx/mx7/soc.c
+++ b/arch/arm/mach-imx/mx7/soc.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ * Copyright 2021 NXP
  */
 
 #include <common.h>
@@ -19,7 +20,6 @@
 #include <dm.h>
 #include <env.h>
 #include <imx_thermal.h>
-#include <fsl_sec.h>
 #include <asm/setup.h>
 #include <linux/delay.h>
 
@@ -337,6 +337,9 @@ int arch_cpu_init(void)
 #ifdef CONFIG_ARCH_MISC_INIT
 int arch_misc_init(void)
 {
+	struct udevice *dev;
+	int ret;
+
 #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 	struct tag_serialnr serialnr;
 	char serial_string[0x20];
@@ -353,9 +356,9 @@ int arch_misc_init(void)
 	env_set("serial#", serial_string);
 #endif
 
-#ifdef CONFIG_FSL_CAAM
-	sec_init();
-#endif
+	ret = uclass_get_device_by_driver(UCLASS_MISC, DM_DRIVER_GET(caam_jr), &dev);
+	if (ret)
+		printf("Failed to initialize %s: %d\n", dev->name, ret);
 
 	return 0;
 }
-- 
2.17.1