[PATCH v3] imx: support i.MX8QM DMSSE20 a1 board

[Fabio Estevam]

Hi Oliver,

On Tue, Nov 30, 2021 at 8:29 AM Oliver Graute
<oliver.graute at kococonnector.com> wrote:
>
> Add i.MX8QM DMSSE20 a1 board support
>
> U-Boot 2021.10-00029-g4ad997ec17 (Nov 30 2021 - 09:40:26 +0100)
>
> Model: Advantech iMX8QM DMSSE20
> Board: DMS-SE20A1 8GB
> Build: SCFW 875cfeb5, SECO-FW d63fdb21, ATF 09c5cc9
> Boot:  USB
> DRAM:  8 GiB
> MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
> Loading Environment from MMC... OK
> In:    serial at 5a060000
> Out:   serial at 5a060000
> Err:   serial at 5a060000
> Net:   eth0: ethernet at 5b040000 [PRIME]
> Warning: ethernet at 5b050000 (eth1) using random MAC address - c6:1b:bf:cc:e5:6c
> , eth1: ethernet at 5b050000
> Hit any key to stop autoboot:  0
>
> Signed-off-by: Oliver Graute <oliver.graute at kococonnector.com>
> ---
>
> This is working on 2021.10. Can you give me some hints what I have to do to
> get it working with current master branch? There are some imx related changes
> that I don't overlook.

What are the exact errors you see with the master branch?