[PATCH v2 06/10] microblaze: drop CONFIG_SYS_RESET_ADDRESS macro

[Ovidiu Panait]

Microblaze is one the last two users of the CONFIG_SYS_RESET_ADDRESS
macro (the other is arch/powerpc/cpu/mpc8xx/cpu.c, but the macro is not
defined anywhere in powerpc code, so it should be removed there too).

Replace CONFIG_SYS_RESET_ADDRESS usage in start.S with
CONFIG_SYS_TEXT_BASE. If the reset address should really be
user-configurable, a new Kconfig option could be added.

Signed-off-by: Ovidiu Panait <ovidiu.panait at windriver.com>
---

(no changes since v1)

 arch/microblaze/cpu/start.S          | 4 +---
 include/configs/microblaze-generic.h | 3 ---
 2 files changed, 1 insertion(+), 6 deletions(-)

diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S
index a1c06108d7..74ed998c55 100644
--- a/arch/microblaze/cpu/start.S
+++ b/arch/microblaze/cpu/start.S
@@ -132,19 +132,17 @@ __setup_exceptions:
 	addi	r2, r0, 0xb0000000	/* hex b000 opcode imm */
 	addi	r3, r0, 0xb8080000	/* hew b808 opcode brai */
 
-#ifdef CONFIG_SYS_RESET_ADDRESS
 	/* reset address */
 	swi	r2, r0, 0x0	/* reset address - imm opcode */
 	swi	r3, r0, 0x4	/* reset address - brai opcode */
 
-	addik	r6, r0, CONFIG_SYS_RESET_ADDRESS
+	addik	r6, r0, CONFIG_SYS_TEXT_BASE
 	sw	r6, r1, r0
 	lhu	r7, r1, r10
 	rsubi	r8, r10, 0x2
 	sh	r7, r0, r8
 	rsubi	r8, r10, 0x6
 	sh	r6, r0, r8
-#endif
 
 #ifdef CONFIG_SYS_USR_EXCEP
 	/* user_vector_exception */
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index e7882fb607..975580e4d4 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -21,9 +21,6 @@
 # define CONFIG_SYS_BAUDRATE_TABLE \
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400}
 
-/* setting reset address */
-/*#define	CONFIG_SYS_RESET_ADDRESS	CONFIG_SYS_TEXT_BASE*/
-
 /* Stack location before relocation */
 #define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_TEXT_BASE - \
 					 CONFIG_SYS_MALLOC_F_LEN)
-- 
2.25.1