[BUG] Pinebook Pro won't boot since ac804143cf, regression from -rc1

[Jack Mitchell]

On 07/09/2021 06:22, Tomasz Bielecki wrote:
> Hi all,
> 
> Starting with:
> ac804143cf (refs/bisect/bad) mmc: rockchip_sdhci: add phy and clock
> config for rk3399
> Pinebook Pro won't boot.
> U-boot is installed on the internal MMC, the serial console shows this:
> 
> U-Boot TPL 2021.10-rc1-00372-gac804143cf-dirty (Sep 06 2021 - 16:32:50)
> Channel 0: LPDDR4, 50MHz
> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
> Channel 1: LPDDR4, 50MHz
> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
> 256B stride
> lpddr4_set_rate: change freq to 400000000 mhz 0, 1
> lpddr4_set_rate: change freq to 800000000 mhz 1, 0
> Trying to boot from BOOTROM
> Returning to boot ROM...
> 
> U-Boot SPL 2021.10-rc1-00372-gac804143cf-dirty (Sep 06 2021 - 16:32:50 -0700)
> Trying to boot from SPI
> Trying to boot from MMC2
> Card did not respond to voltage select! : -110
> spl: mmc init failed with error: -95
> SPL: failed to boot from all boot devices
> ### ERROR ### Please RESET the board ###
> 

Hi Tomasz,

I'm hitting the same issue with a custom 3399 based board, did you ever
get to the bottom of it?

Regards,

-- 
Jack Mitchell, Consultant
https://www.tuxable.co.uk