[PATCH] Revert "configs: stm32mp1: only support SD card after NOR in bootcmd_stm32mp"

Patrick DELAUNAY patrick.delaunay at foss.st.com
Mon Oct 4 18:34:03 CEST 2021


Hi,

On 10/4/21 1:48 PM, Marek Vasut wrote:
> This reverts commit d5d726d3cc47691ace3c68fa31147ad104aaf579,
> which breaks boards which ship with multiple SD/eMMC sockets.
>
> This stm32mp1.h config is not used only by the ST reference
> boards, but all the other STM32MP1 based boards in U-Boot, so
> changes to this stm32mp1.h cannot break the other boards.
>
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Patrice Chotard <patrice.chotard at foss.st.com>
> Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
> NOTE: I think we might need to split out the env for different
>        boards into different headers instead. Thoughts ?
> ---
>   include/configs/stm32mp1.h | 4 +---
>   1 file changed, 1 insertion(+), 3 deletions(-)
>
> diff --git a/include/configs/stm32mp1.h b/include/configs/stm32mp1.h
> index 973a4f1d4b8..a75ed693f57 100644
> --- a/include/configs/stm32mp1.h
> +++ b/include/configs/stm32mp1.h
> @@ -120,7 +120,7 @@
>    * for serial/usb: execute the stm32prog command
>    * for mmc boot (eMMC, SD card), boot only on the same device
>    * for nand or spi-nand boot, boot with on ubifs partition on UBI partition
> - * for nor boot, use SD card = mmc0
> + * for nor boot, use the default order
>    */
>   #define STM32MP_BOOTCMD "bootcmd_stm32mp=" \
>   	"echo \"Boot over ${boot_device}${boot_instance}!\";" \
> @@ -133,8 +133,6 @@
>   		"if test ${boot_device} = nand ||" \
>   		  " test ${boot_device} = spi-nand ;" \
>   		"then env set boot_targets ubifs0; fi;" \
> -		"if test ${boot_device} = nor;" \
> -		"then env set boot_targets mmc0; fi;" \
>   		"run distro_bootcmd;" \
>   	"fi;\0"
>   


Reviewed-by: Patrick Delaunay <patrick.delaunay at foss.st.com>


Sorry to break your board, but I assumed the "stm32mp1.h" was only the 
default ST configuration

for ST boards and other boards need to be overridden it if it is not 
align with their needs

as I don't know the expected boot sequence.

for example with:

     CONFIG_BOOTCOMMAND="run bootcmd_dh_stm32mp"

with bootcmd_dh_stm32mp to be defined


but today this file is a mix between SOC configuration (generic) and ST 
boards needs.


So I will merge your revert and I will push a other solution to only 
support SD card

after NOR in bootcmd_stm32mp but only for STMicroelectronics boards

(because the revert now break the EV1 boot from NOR).

1) stm32mp1.h = common for SOC STMP15x (as today)

2) st_stm32mp1.h = ST boards configuration (override common)


Thanks
Patrick




More information about the U-Boot mailing list