[resent RFC 06/22] sata: call device_probe() after scanning

[Ilias Apalodimas]

On Mon, Oct 04, 2021 at 12:44:14PM +0900, AKASHI Takahiro wrote:
> Every time a sata bus/port is scanned and a new device is detected,
> we want to call device_probe() as it will give us a chance to run additional
> post-processings for some purposes.
> 
> In particular, support for creating partitions on a device will be added.
> 
> Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>
> ---
>  drivers/ata/dwc_ahsata.c | 10 ++++++++++
>  drivers/ata/fsl_sata.c   | 11 +++++++++++
>  drivers/ata/sata_mv.c    |  9 +++++++++
>  drivers/ata/sata_sil.c   | 12 ++++++++++++
>  4 files changed, 42 insertions(+)
> 
> diff --git a/drivers/ata/dwc_ahsata.c b/drivers/ata/dwc_ahsata.c
> index 6d42548087b3..6a51c70d1170 100644
> --- a/drivers/ata/dwc_ahsata.c
> +++ b/drivers/ata/dwc_ahsata.c
> @@ -1026,6 +1026,16 @@ int dwc_ahsata_scan(struct udevice *dev)
>  		return ret;
>  	}
>  
> +	ret = device_probe(bdev);
> +	if (ret < 0) {
> +		debug("Can't probe\n");
> +		/* TODO: undo create */
> +
> +		device_unbind(bdev);
> +
> +		return ret;
> +	}
> +

Patches 2-6 seem to do the same thing for different subsystems.  I think
creating a function for that would make it easier. 

>  	return 0;
>  }
>  
> diff --git a/drivers/ata/fsl_sata.c b/drivers/ata/fsl_sata.c
> index e44db0a37458..346e9298b4c5 100644
> --- a/drivers/ata/fsl_sata.c
> +++ b/drivers/ata/fsl_sata.c
> @@ -982,6 +982,17 @@ static int fsl_ata_probe(struct udevice *dev)
>  			failed_number++;
>  			continue;
>  		}
> +
> +		ret = device_probe(bdev);
> +		if (ret < 0) {
> +			debug("Can't probe\n");
> +			ret = fsl_unbind_device(blk);

Apart from this exception I guess

> +			if (ret)
> +				return ret;
> +
> +			failed_number++;
> +			continue;
> +		}
>  	}
>  
>  	if (failed_number == nr_ports)
> diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
> index 003222d47be6..09b735779ebf 100644
> --- a/drivers/ata/sata_mv.c
> +++ b/drivers/ata/sata_mv.c
> @@ -1099,6 +1099,15 @@ static int sata_mv_probe(struct udevice *dev)
>  			continue;
>  		}
>  
> +		ret = device_probe(bdev);
> +		if (ret < 0) {
> +			debug("Can't probe\n");
> +			/* TODO: undo create */
> +
> +			device_unbind(bdev);
> +			continue;
> +		}
> +
>  		/* If we got here, the current SATA port was probed
>  		 * successfully, so set the probe status to successful.
>  		 */
> diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
> index dda712f42cb2..295f7ca72303 100644
> --- a/drivers/ata/sata_sil.c
> +++ b/drivers/ata/sata_sil.c
> @@ -864,6 +864,18 @@ static int sil_pci_probe(struct udevice *dev)
>  			failed_number++;
>  			continue;
>  		}
> +
> +		ret = device_probe(bdev);
> +		if (ret < 0) {
> +			debug("Can't probe\n");
> +			ret = sil_unbind_device(blk);
> +			device_unbind(bdev);
> +			if (ret)
> +				return ret;
> +
> +			failed_number++;
> +			continue;
> +		}
>  	}
>  
>  	if (failed_number == sata_info.maxport)
> -- 
> 2.33.0
>