[PATCH v3 00/29] arm: dts: ls1028a: sync device tree with linux

[Vladimir Oltean]

On Thu, Sep 02, 2021 at 06:45:29PM +0200, Michael Walle wrote:
> This series sync the device tree of the LS1028A SoC with the linux one.
> To ease future debugging and reviewing, we first clean up the existing one,
> removing bogus nodes, moving all CCSR related nodes in /soc and update the
> drivers to accept the offical compatible strings.
> 
> This was tested on a sl28 board, but the ls1028a.dtsi sync also affects the
> LS1028A-RDB and -QDS. It would be nice if someone could actually test it on
> such a board.
> 
> I didn't sync the device trees for the NXP boards because u-boot related
> things aren't split into its own -u-boot.dtsi file. So I'll leave that task
> to NXP :)
> 
> The following patch is a prerequisite for this series:
>   https://patchwork.ozlabs.org/project/uboot/patch/20210825210510.24766-1-trini@konsulko.com/
> 
> changes since v2:
>  - move the device tree nodes piece by piece and sort them to ease
>    reviewing
>  - fix PCI driver (bindings)
>  - fix SATA driver (bindings)
>  - fix USB driver (bindings)
>  - split most changes which are caused by the sync of the linux
>    device tree to own patches, eg. pcie io window, spi chip selects
> 
> The final diff for the sync is much nicer now ;)
> 
> changes since v1:
>  - remove u-boot,dm-pre-reloc from rdb and qds boards
>  - fix enetc0 and enetc2 labels

These patches no longer apply, can you please resend?