[PATCH v2] ARM: amlogic: update JetHub D1/H1 configs (was: add SYS_LOAD_ADDR to JetHub D1/H1 configs)

Vyacheslav Bocharov adeep at lexina.in
Wed Oct 6 17:11:48 CEST 2021


- late fix for 49c8ef0e45a91ec894ef15e7d043dafe8f1c5efd commit by Tom Rini.
- enable i2c, rtc, eeprom

Changes:
- add i2c, rtc, eeprom

Signed-off-by: Vyacheslav Bocharov <adeep at lexina.in>
---
 configs/jethub_j100_defconfig | 8 ++++++++
 configs/jethub_j80_defconfig  | 8 ++++++++
 2 files changed, 16 insertions(+)

diff --git a/configs/jethub_j100_defconfig b/configs/jethub_j100_defconfig
index 290ce4db85..533f251855 100644
--- a/configs/jethub_j100_defconfig
+++ b/configs/jethub_j100_defconfig
@@ -11,21 +11,27 @@ CONFIG_DEBUG_UART_BASE=0xff803000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" jethubj100"
 CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x01000000
 CONFIG_OF_BOARD_SETUP=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_MISC_INIT_R=y
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
+CONFIG_CMD_EEPROM=y
 CONFIG_CMD_GPIO=y
 CONFIG_RANDOM_UUID=y
+CONFIG_CMD_I2C=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_RTC=y
 CONFIG_CMD_REGULATOR=y
 CONFIG_PARTITION_TYPE_GUID=y
 CONFIG_OF_CONTROL=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MESON=y
 CONFIG_MMC_MESON_GX=y
 CONFIG_MTD_UBI=y
 CONFIG_PHY_REALTEK=y
@@ -37,6 +43,8 @@ CONFIG_PINCTRL_MESON_AXG=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_RESET=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_PCF8563=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_DEBUG_UART_SKIP_INIT=y
 CONFIG_MESON_SERIAL=y
diff --git a/configs/jethub_j80_defconfig b/configs/jethub_j80_defconfig
index 7db05af3b0..ad6bec0c43 100644
--- a/configs/jethub_j80_defconfig
+++ b/configs/jethub_j80_defconfig
@@ -12,25 +12,31 @@ CONFIG_DEBUG_UART_BASE=0xc81004c0
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_IDENT_STRING=" jethubj80"
 CONFIG_DEBUG_UART=y
+CONFIG_SYS_LOAD_ADDR=0x01000000
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_CONSOLE_MUX=y
 # CONFIG_DISPLAY_CPUINFO is not set
 CONFIG_MISC_INIT_R=y
 # CONFIG_CMD_BDI is not set
 # CONFIG_CMD_IMI is not set
+CONFIG_CMD_EEPROM=y
 CONFIG_CMD_ADC=y
 CONFIG_CMD_GPIO=y
 CONFIG_RANDOM_UUID=y
+CONFIG_CMD_I2C=y
 # CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_RTC=y
 CONFIG_CMD_REGULATOR=y
 CONFIG_PARTITION_TYPE_GUID=y
 CONFIG_OF_CONTROL=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_SARADC_MESON=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MESON=y
 CONFIG_MMC_MESON_GX=y
 CONFIG_MTD_UBI=y
 CONFIG_PHY_MESON_GXL=y
@@ -45,6 +51,8 @@ CONFIG_PINCTRL_MESON_GXL=y
 CONFIG_DM_REGULATOR=y
 CONFIG_DM_REGULATOR_FIXED=y
 CONFIG_DM_RESET=y
+CONFIG_DM_RTC=y
+CONFIG_RTC_PCF8563=y
 CONFIG_DEBUG_UART_ANNOUNCE=y
 CONFIG_DEBUG_UART_SKIP_INIT=y
 CONFIG_MESON_SERIAL=y
-- 
2.30.2



More information about the U-Boot mailing list