[PATCH v2 5/5] colibri-imx6ull: add emmc variant

Marcel Ziswiler marcel at ziswiler.com
Wed Oct 6 18:55:36 CEST 2021


From: Max Krummenacher <max.krummenacher at toradex.com>

Add code to build the eMMC variant of the Colibri iMX6ULL, i.e. the
'Colibri iMX6ULL 1GB' which has a eMMC instead of the raw NAND used
on other SKUs.

Related-to: ELB-4056, ELB-4057
Signed-off-by: Max Krummenacher <max.krummenacher at toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>

---

Changes in v2:
- Re-based.

 arch/arm/dts/Makefile                         |  1 +
 arch/arm/dts/imx6ull-colibri-emmc.dts         | 49 +++++++++++
 arch/arm/dts/imx6ull-colibri.dts              | 34 ++++++-
 arch/arm/dts/imx6ull-colibri.dtsi             | 32 +------
 board/toradex/colibri-imx6ull/Kconfig         | 48 +++++++++-
 board/toradex/colibri-imx6ull/MAINTAINERS     |  4 +-
 .../toradex/colibri-imx6ull/colibri-imx6ull.c | 29 +++++-
 configs/colibri-imx6ull-emmc_defconfig        | 88 +++++++++++++++++++
 configs/colibri-imx6ull_defconfig             |  2 +-
 include/configs/colibri-imx6ull.h             | 51 ++++++++---
 10 files changed, 290 insertions(+), 48 deletions(-)
 create mode 100644 arch/arm/dts/imx6ull-colibri-emmc.dts
 create mode 100644 configs/colibri-imx6ull-emmc_defconfig

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 9438bf735aa..ab0340ccd5d 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -820,6 +820,7 @@ dtb-$(CONFIG_MX6UL) += \
 dtb-$(CONFIG_MX6ULL) += \
 	imx6ull-14x14-evk.dtb \
 	imx6ull-colibri.dtb \
+	imx6ull-colibri-emmc.dtb \
 	imx6ull-myir-mys-6ulx-eval.dtb \
 	imx6ull-seeed-npi-imx6ull-dev-board.dtb \
 	imx6ull-phytec-segin-ff-rdk-emmc.dtb \
diff --git a/arch/arm/dts/imx6ull-colibri-emmc.dts b/arch/arm/dts/imx6ull-colibri-emmc.dts
new file mode 100644
index 00000000000..cbb561ffb4a
--- /dev/null
+++ b/arch/arm/dts/imx6ull-colibri-emmc.dts
@@ -0,0 +1,49 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2021 Toradex AG
+ */
+
+#include "imx6ull-colibri.dtsi"
+#include "imx6ull-colibri-u-boot.dtsi"
+
+/ {
+	model = "Toradex Colibri iMX6ULL 1GB (eMMC)";
+	compatible = "toradex,colibri-imx6ull-emmc", "toradex,colibri-imx6ull", "fsl,imx6ull";
+
+	aliases {
+		mmc0 = &usdhc2;
+		mmc1 = &usdhc1;
+	};
+};
+
+/* eMMC */
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2emmc>;
+	assigned-clocks = <&clks IMX6UL_CLK_USDHC2_SEL>, <&clks IMX6UL_CLK_USDHC2>;
+	assigned-clock-parents = <&clks IMX6UL_CLK_PLL2_PFD2>;
+	assigned-clock-rates = <0>, <198000000>;
+	bus-width = <8>;
+	keep-power-in-suspend;
+	no-1-8-v;
+	non-removable;
+	vmmc-supply = <&reg_module_3v3>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usdhc2emmc: usdhc2emmcgrp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x17059
+			MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
+			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
+			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
+			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
+			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx6ull-colibri.dts b/arch/arm/dts/imx6ull-colibri.dts
index 15338a1ae3d..dbe3e0206e5 100644
--- a/arch/arm/dts/imx6ull-colibri.dts
+++ b/arch/arm/dts/imx6ull-colibri.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
- * Copyright 2018-2019 Toradex AG
+ * Copyright 2018-2021 Toradex AG
  */
 
 #include "imx6ull-colibri.dtsi"
@@ -10,3 +10,35 @@
 	model = "Toradex Colibri iMX6ULL";
 	compatible = "toradex,colibri-imx6ull", "fsl,imx6ull";
 };
+
+/* NAND */
+&gpmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpmi_nand>;
+	nand-on-flash-bbt;
+	nand-ecc-mode = "hw";
+	nand-ecc-strength = <8>;
+	nand-ecc-step-size = <512>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_gpmi_nand: gpmi-nand-grp {
+		fsl,pins = <
+			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x100a9
+			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x100a9
+			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x100a9
+			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x100a9
+			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x100a9
+			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x100a9
+			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x100a9
+			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x100a9
+			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x100a9
+			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x100a9
+			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x100a9
+			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x100a9
+			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x100a9
+			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x100a9
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx6ull-colibri.dtsi b/arch/arm/dts/imx6ull-colibri.dtsi
index b7bf79f28cb..1fa9d10412e 100644
--- a/arch/arm/dts/imx6ull-colibri.dtsi
+++ b/arch/arm/dts/imx6ull-colibri.dtsi
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
- * Copyright 2019 Toradex AG
+ * Copyright 2019-2021 Toradex AG
  */
 
 /dts-v1/;
@@ -92,17 +92,6 @@
 	};
 };
 
-/* NAND */
-&gpmi {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_gpmi_nand>;
-	nand-on-flash-bbt;
-	nand-ecc-mode = "hw";
-	nand-ecc-strength = <8>;
-	nand-ecc-step-size = <512>;
-	status = "okay";
-};
-
 /*
  * I2C3_SDA/SCL on SODIMM 194/196 (e.g. RTC on carrier board)
  */
@@ -340,25 +329,6 @@
 		>;
 	};
 
-	pinctrl_gpmi_nand: gpmi-nand-grp {
-		fsl,pins = <
-			MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00	0x100a9
-			MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01	0x100a9
-			MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02	0x100a9
-			MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03	0x100a9
-			MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04	0x100a9
-			MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05	0x100a9
-			MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06	0x100a9
-			MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07	0x100a9
-			MX6UL_PAD_NAND_CLE__RAWNAND_CLE		0x100a9
-			MX6UL_PAD_NAND_ALE__RAWNAND_ALE		0x100a9
-			MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B	0x100a9
-			MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B	0x100a9
-			MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B	0x100a9
-			MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B	0x100a9
-		>;
-	};
-
 	pinctrl_i2c1: i2c1-grp {
 		fsl,pins = <
 			MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
diff --git a/board/toradex/colibri-imx6ull/Kconfig b/board/toradex/colibri-imx6ull/Kconfig
index e5e4af33648..9fbc30f6b35 100644
--- a/board/toradex/colibri-imx6ull/Kconfig
+++ b/board/toradex/colibri-imx6ull/Kconfig
@@ -1,5 +1,24 @@
 if TARGET_COLIBRI_IMX6ULL
 
+choice
+	prompt "Colibri iMX6ULL variant"
+	optional
+
+config TARGET_COLIBRI_IMX6ULL_NAND
+	bool "Support Colibri iMX6ULL 256MB / 512MB (raw NAND) modules"
+	imply NAND_MXS
+	help
+	  Choose this option if you build for a Toradex Colibri iMX6ULL
+	  256MB or 512MB module which do have raw NAND on-module.
+
+config TARGET_COLIBRI_IMX6ULL_EMMC
+	bool "Support Colibri iMX6ULL 1GB (eMMC) modules"
+	help
+	  Choose this option if you build for a Toradex Colibri iMX6ULL
+	  1GB module which does have eMMC on-module.
+
+endchoice
+
 config SYS_BOARD
 	default "colibri-imx6ull"
 
@@ -7,11 +26,16 @@ config SYS_VENDOR
 	default "toradex"
 
 config SYS_CONFIG_NAME
-	default "colibri-imx6ull"
+	default "colibri-imx6ull-tezi-recovery" if (!TARGET_COLIBRI_IMX6ULL_NAND && !TARGET_COLIBRI_IMX6ULL_EMMC)
 
 config TDX_CFG_BLOCK
 	default y
 
+if TARGET_COLIBRI_IMX6ULL_NAND
+
+config SYS_CONFIG_NAME
+	default "colibri-imx6ull"
+
 config TDX_HAVE_NAND
 	default y
 
@@ -21,6 +45,28 @@ config TDX_CFG_BLOCK_OFFSET
 config TDX_CFG_BLOCK_OFFSET2
 	default "133120"
 
+endif
+
+if TARGET_COLIBRI_IMX6ULL_EMMC
+
+config SYS_CONFIG_NAME
+	default "colibri-imx6ull"
+
+config TDX_HAVE_MMC
+	default y
+
+config TDX_CFG_BLOCK_DEV
+	default "0"
+
+config TDX_CFG_BLOCK_PART
+	default "1"
+
+# Toradex config block in eMMC, at the end of 1st "boot sector"
+config TDX_CFG_BLOCK_OFFSET
+	default "-512"
+
+endif
+
 config TDX_CFG_BLOCK_2ND_ETHADDR
 	default y
 
diff --git a/board/toradex/colibri-imx6ull/MAINTAINERS b/board/toradex/colibri-imx6ull/MAINTAINERS
index eb491c273d2..500c787b8e5 100644
--- a/board/toradex/colibri-imx6ull/MAINTAINERS
+++ b/board/toradex/colibri-imx6ull/MAINTAINERS
@@ -4,8 +4,10 @@ W:	http://developer.toradex.com/software/linux/linux-software
 W:	https://www.toradex.com/community
 S:	Maintained
 F:	arch/arm/dts/imx6ull-colibri.dts
-F:	arch/arm/dts/imx6ull-colibri-u-boot.dtsi
 F:	arch/arm/dts/imx6ull-colibri.dtsi
+F:	arch/arm/dts/imx6ull-colibri-emmc.dts
+F:	arch/arm/dts/imx6ull-colibri-u-boot.dtsi
 F:	board/toradex/colibri-imx6ull/
 F:	configs/colibri-imx6ull_defconfig
+F:	configs/colibri-imx6ull-emmc_defconfig
 F:	include/configs/colibri-imx6ull.h
diff --git a/board/toradex/colibri-imx6ull/colibri-imx6ull.c b/board/toradex/colibri-imx6ull/colibri-imx6ull.c
index 01f5561596e..954498d5e95 100644
--- a/board/toradex/colibri-imx6ull/colibri-imx6ull.c
+++ b/board/toradex/colibri-imx6ull/colibri-imx6ull.c
@@ -43,6 +43,14 @@ DECLARE_GLOBAL_DATA_PTR;
 
 #define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_48ohm | PAD_CTL_PUS_22K_UP)
 
+#define FLASH_DETECTION_CTRL (PAD_CTL_HYS | PAD_CTL_PUE)
+#define FLASH_DET_GPIO	IMX_GPIO_NR(4, 1)
+static const iomux_v3_cfg_t flash_detection_pads[] = {
+	MX6_PAD_NAND_WE_B__GPIO4_IO01 | MUX_PAD_CTRL(FLASH_DETECTION_CTRL),
+};
+
+static bool is_emmc;
+
 int dram_init(void)
 {
 	gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
@@ -59,7 +67,7 @@ static void setup_gpmi_nand(void)
 #endif /* CONFIG_NAND_MXS */
 
 #ifdef CONFIG_DM_VIDEO
-static iomux_v3_cfg_t const backlight_pads[] = {
+static const iomux_v3_cfg_t backlight_pads[] = {
 	/* Backlight On */
 	MX6_PAD_JTAG_TMS__GPIO1_IO11		| MUX_PAD_CTRL(NO_PAD_CTRL),
 	/* Backlight PWM<A> (multiplexed pin) */
@@ -120,6 +128,16 @@ int board_init(void)
 	/* address of boot parameters */
 	gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
 
+	/*
+	 * Enable GPIO on NAND_WE_B/eMMC_RST with 100k pull-down. eMMC_RST
+	 * is pulled high with 4.7k for eMMC devices. This allows to reliably
+	 * detect eMMC/NAND flash
+	 */
+	imx_iomux_v3_setup_multiple_pads(flash_detection_pads, ARRAY_SIZE(flash_detection_pads));
+	gpio_request(FLASH_DET_GPIO, "flash-detection-gpio");
+	is_emmc = gpio_get_value(FLASH_DET_GPIO);
+	gpio_free(FLASH_DET_GPIO);
+
 #ifdef CONFIG_FEC_MXC
 	setup_fec();
 #endif
@@ -148,8 +166,15 @@ int board_late_init(void)
 	 * Wi-Fi/Bluetooth make sure we use the -wifi device tree.
 	 */
 	if (tdx_hw_tag.prodid == COLIBRI_IMX6ULL_WIFI_BT_IT ||
-	    tdx_hw_tag.prodid == COLIBRI_IMX6ULL_WIFI_BT)
+	    tdx_hw_tag.prodid == COLIBRI_IMX6ULL_WIFI_BT) {
 		env_set("variant", "-wifi");
+	} else {
+		if (is_emmc)
+			env_set("variant", "-emmc");
+	}
+#else
+	if (is_emmc)
+		env_set("variant", "-emmc");
 #endif
 
 	/*
diff --git a/configs/colibri-imx6ull-emmc_defconfig b/configs/colibri-imx6ull-emmc_defconfig
new file mode 100644
index 00000000000..4b346a98793
--- /dev/null
+++ b/configs/colibri-imx6ull-emmc_defconfig
@@ -0,0 +1,88 @@
+CONFIG_ARM=y
+CONFIG_ARCH_MX6=y
+CONFIG_SYS_TEXT_BASE=0x87800000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_SYS_MEMTEST_START=0x80000000
+CONFIG_SYS_MEMTEST_END=0x88000000
+CONFIG_ENV_SIZE=0x2000
+CONFIG_ENV_OFFSET=0xFFFFDE00
+CONFIG_MX6ULL=y
+CONFIG_TARGET_COLIBRI_IMX6ULL=y
+CONFIG_DM_GPIO=y
+CONFIG_TARGET_COLIBRI_IMX6ULL_EMMC=y
+CONFIG_DEFAULT_DEVICE_TREE="imx6ull-colibri-emmc"
+CONFIG_DISTRO_DEFAULTS=y
+CONFIG_FIT=y
+CONFIG_BOOTDELAY=1
+# CONFIG_USE_BOOTCOMMAND is not set
+CONFIG_USE_PREBOOT=y
+CONFIG_PREBOOT="setenv fdtfile imx6ull-colibri${variant}-${fdt_board}.dtb"
+# CONFIG_CONSOLE_MUX is not set
+CONFIG_SYS_CONSOLE_IS_IN_ENV=y
+# CONFIG_DISPLAY_BOARDINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_SYS_PROMPT="Colibri iMX6ULL # "
+# CONFIG_BOOTM_PLAN9 is not set
+# CONFIG_BOOTM_RTEMS is not set
+# CONFIG_CMD_ELF is not set
+# CONFIG_CMD_IMI is not set
+# CONFIG_CMD_XIMG is not set
+CONFIG_CMD_ASKENV=y
+CONFIG_CRC32_VERIFY=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_DM=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_I2C=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_SDP=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_BMP=y
+CONFIG_CMD_BOOTCOUNT=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_REGULATOR=y
+# CONFIG_ISO_PARTITION is not set
+CONFIG_OF_CONTROL=y
+CONFIG_ENV_OVERWRITE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_SYS_MMC_ENV_PART=1
+CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y
+CONFIG_VERSION_VARIABLE=y
+CONFIG_IP_DEFRAG=y
+CONFIG_TFTP_BLOCKSIZE=16352
+CONFIG_TFTP_TSIZE=y
+CONFIG_BOUNCE_BUFFER=y
+CONFIG_BOOTCOUNT_LIMIT=y
+CONFIG_BOOTCOUNT_ENV=y
+CONFIG_DM_I2C=y
+CONFIG_SYS_I2C_MXC=y
+CONFIG_SUPPORT_EMMC_BOOT=y
+CONFIG_FSL_USDHC=y
+CONFIG_PHYLIB=y
+CONFIG_PHY_MICREL=y
+CONFIG_DM_ETH=y
+CONFIG_FEC_MXC=y
+CONFIG_MII=y
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX6=y
+CONFIG_DM_REGULATOR=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_DM_SERIAL=y
+CONFIG_MXC_UART=y
+CONFIG_IMX_THERMAL=y
+CONFIG_USB=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MANUFACTURER="Toradex"
+CONFIG_USB_GADGET_VENDOR_NUM=0x1b67
+CONFIG_USB_GADGET_PRODUCT_NUM=0x4000
+CONFIG_CI_UDC=y
+CONFIG_USB_GADGET_DOWNLOAD=y
+CONFIG_DM_VIDEO=y
+CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_SPLASH_SCREEN=y
+CONFIG_SPLASH_SCREEN_ALIGN=y
+CONFIG_VIDEO_BMP_RLE8=y
+CONFIG_BMP_16BPP=y
+CONFIG_OF_LIBFDT_OVERLAY=y
diff --git a/configs/colibri-imx6ull_defconfig b/configs/colibri-imx6ull_defconfig
index f5fd4815d45..ec75c1dede3 100644
--- a/configs/colibri-imx6ull_defconfig
+++ b/configs/colibri-imx6ull_defconfig
@@ -10,6 +10,7 @@ CONFIG_MX6ULL=y
 CONFIG_TARGET_COLIBRI_IMX6ULL=y
 CONFIG_SYS_MALLOC_LEN=0x2000000
 CONFIG_DM_GPIO=y
+CONFIG_TARGET_COLIBRI_IMX6ULL_NAND=y
 CONFIG_DEFAULT_DEVICE_TREE="imx6ull-colibri"
 CONFIG_DISTRO_DEFAULTS=y
 CONFIG_FIT=y
@@ -71,7 +72,6 @@ CONFIG_MTD=y
 CONFIG_DM_MTD=y
 CONFIG_MTD_RAW_NAND=y
 CONFIG_SYS_NAND_USE_FLASH_BBT=y
-CONFIG_NAND_MXS=y
 CONFIG_NAND_MXS_DT=y
 CONFIG_MTD_UBI_FASTMAP=y
 CONFIG_PHYLIB=y
diff --git a/include/configs/colibri-imx6ull.h b/include/configs/colibri-imx6ull.h
index 5aa42928bce..1ba81eb9fb6 100644
--- a/include/configs/colibri-imx6ull.h
+++ b/include/configs/colibri-imx6ull.h
@@ -1,6 +1,6 @@
 /* SPDX-License-Identifier: GPL-2.0+ */
 /*
- * Copyright 2018-2019 Toradex AG
+ * Copyright 2018-2021 Toradex AG
  *
  * Configuration settings for the Colibri iMX6ULL module.
  *
@@ -26,6 +26,22 @@
 #define CONFIG_NETMASK			255.255.255.0
 #define CONFIG_SERVERIP			192.168.10.1
 
+#if defined(CONFIG_TARGET_COLIBRI_IMX6ULL_EMMC)
+#define UBOOT_UPDATE \
+	"uboot_hwpart=1\0" \
+	"uboot_blk=2\0" \
+	"set_blkcnt=setexpr blkcnt ${filesize} + 0x1ff && " \
+		"setexpr blkcnt ${blkcnt} / 0x200\0" \
+	"update_uboot=run set_blkcnt && mmc dev 0 ${uboot_hwpart} && " \
+		"mmc write ${loadaddr} ${uboot_blk} ${blkcnt}\0"
+#elif defined(CONFIG_TARGET_COLIBRI_IMX6ULL_NAND)
+#define UBOOT_UPDATE \
+	"update_uboot=nand erase.part u-boot1 && " \
+		"nand write ${loadaddr} u-boot1 ${filesize} && " \
+		"nand erase.part u-boot2 && " \
+		"nand write ${loadaddr} u-boot2 ${filesize}\0"
+#endif
+
 #define MEM_LAYOUT_ENV_SETTINGS \
 	"bootm_size=0x10000000\0" \
 	"fdt_addr_r=0x82100000\0" \
@@ -34,12 +50,6 @@
 	"ramdisk_addr_r=0x82200000\0" \
 	"scriptaddr=0x87000000\0"
 
-#define UBOOT_UPDATE \
-	"update_uboot=nand erase.part u-boot1 && " \
-		"nand write ${loadaddr} u-boot1 ${filesize} && " \
-		"nand erase.part u-boot2 && " \
-		"nand write ${loadaddr} u-boot2 ${filesize}\0"
-
 #define NFS_BOOTCMD \
 	"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
 	"nfsboot=run setup; " \
@@ -60,17 +70,32 @@
 		"ubi read ${fdt_addr_r} dtb && " \
 		"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
 
+#if defined(CONFIG_TARGET_COLIBRI_IMX6ULL_NAND)
 /* Run Distro Boot script if ubiboot fails */
 #define CONFIG_BOOTCOMMAND "run ubiboot || run distro_bootcmd;"
+#define DFU_ALT_NAND_INFO "imx6ull-bcb part 0,1;u-boot1 part 0,2;u-boot2 part 0,3;u-boot-env part 0,4;ubi partubi 0,5"
+#define MODULE_EXTRA_ENV_SETTINGS \
+	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
+	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
+	UBI_BOOTCMD
+#else
+#define	MODULE_EXTRA_ENV_SETTINGS ""
+#endif
 
+#if defined(CONFIG_TARGET_COLIBRI_IMX6ULL_NAND)
+#define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 0) \
+	func(USB, usb, 0) \
+	func(DHCP, dhcp, na)
+#elif defined(CONFIG_TARGET_COLIBRI_IMX6ULL_EMMC)
 #define BOOT_TARGET_DEVICES(func) \
+	func(MMC, mmc, 1) \
 	func(MMC, mmc, 0) \
 	func(USB, usb, 0) \
 	func(DHCP, dhcp, na)
+#endif
 #include <config_distro_bootcmd.h>
 
-#define DFU_ALT_NAND_INFO "imx6ull-bcb part 0,1;u-boot1 part 0,2;u-boot2 part 0,3;u-boot-env part 0,4;ubi partubi 0,5"
-
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	BOOTENV \
 	MEM_LAYOUT_ENV_SETTINGS \
@@ -80,12 +105,10 @@
 	"bootubipart=ubi\0" \
 	"console=ttymxc0\0" \
 	"defargs=user_debug=30\0" \
-	"dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \
 	"fdt_board=eval-v3\0" \
 	"fdt_fixup=;\0" \
 	"ip_dyn=yes\0" \
 	"kernel_file=zImage\0" \
-	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
 	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 		"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
 		"${board}/flash_eth.img && source ${loadaddr}\0" \
@@ -117,11 +140,17 @@
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 
+/* environment organization */
+
+/* Environment in eMMC, before config block at the end of 1st "boot sector" */
+
+#ifdef CONFIG_TARGET_COLIBRI_IMX6ULL_NAND
 /* NAND stuff */
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 /* used to initialize CONFIG_SYS_NAND_BASE_LIST which is unused */
 #define CONFIG_SYS_NAND_BASE		-1
 #define CONFIG_SYS_NAND_ONFI_DETECTION
+#endif
 
 /* USB Configs */
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
-- 
2.26.2



More information about the U-Boot mailing list