[RFC PATCH v1 0/5] arm64: dts: imx8mm: add common -binman.dtsi and further clean-up

[Marcel Ziswiler]

On Thu, 2021-09-02 at 14:08 -0300, Fabio Estevam wrote:
> Hi Marcel,
> 
> On Thu, Aug 26, 2021 at 9:14 AM Marcel Ziswiler <marcel at ziswiler.com> wrote:
> > 
> > From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
> > 
> > 
> > With the move to using binman to generate SPL aka u-boot-spl-ddr.bin and
> > U-Boot proper aka u-boot.itb every board now covers such configuration
> > in its own U-Boot specific device tree include. Introduce a new common
> > imx8mm-binman.dtsi which covers the common part of that configuration.
> > 
> > The initial patch fixes an issue with intermediate binary naming for the
> > imx8mm-cl-iot-gate. And subsequent patches further clean up that dtsi.
> > 
> > This series is based on Peng's binman conversion of late [1], my Verdin
> > iMX8M Mini target refresh [2], Fabio's generating a single bootable
> > flash.bin again for imx8mm-evk [3], Tim's switching imx8mm_venice to
> > using binman to pack images [4] and Frieder's support for Kontron
> > Electronics i.MX6UL/ULL and i.MX8MM SoMs [5].
> > 
> > This series has been run-time tested on Verdin iMX8M Mini. The other
> > targets were only compile tested.
> > 
> > Please note that for now, I left out the following intricacies of
> > imx8mm-venice-u-boot.dtsi. Not quite sure what exactly those are used
> > for.
> 
> The series looks good.

Thanks!

> We just need to find a way to not break imx8mm-venice.

Yep, yep. I cleaned that up now and will send a v2 shortly.

BTW: Now with 2021.10 released I hope somebody will pick up all my in-flight patch sets soon (;-p).

> Thanks