[PATCH v5 10/10] verdin-imx8mm: fix watchdog pinctrl issue

Marcel Ziswiler marcel at ziswiler.com
Fri Oct 8 02:28:15 CEST 2021

From: Marcel Ziswiler <marcel.ziswiler at toradex.com>

Finally, found the root cause of the issue already once mentioned back
here [2] which caused the following error message during boot:

imx_wdt watchdog at 30280000:
 pinctrl_select_state_full: uclass_get_device_by_phandle_id: err=-19

Turns out while the watchdog node itself was already u-boot,dm-spl its
pinctrl node was not which caused it to be unavailable at that early
stage. Note that any and all other boards I checked also seem to be
missing this. However, I can't judge whether or not they might indeed
need a similar fix or not.

[2] https://marc.info/?l=u-boot&m=161786572422973

Fixes: commit d304e7ace3a6
 ("ARM: imx8m: Fix reset in SPL on Toradex iMX8MM Verdin")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
Reviewed-by: Fabio Estevam <festevam at gmail.com>


(no changes since v2)

Changes in v2:
- New patch fixing watchdog pinctrl issue.

 arch/arm/dts/imx8mm-verdin-u-boot.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm/dts/imx8mm-verdin-u-boot.dtsi b/arch/arm/dts/imx8mm-verdin-u-boot.dtsi
index 0c65070cd5f..bf47930c36f 100644
--- a/arch/arm/dts/imx8mm-verdin-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-verdin-u-boot.dtsi
@@ -68,6 +68,10 @@
+&pinctrl_wdog {
+	u-boot,dm-spl;
 &{/soc at 0/bus at 30800000/i2c at 30a20000/pmic} {

More information about the U-Boot mailing list