[PATCH v2 12/12] sunxi: Enable DM_I2C for all sunxi boards

[Samuel Holland]

Now that the last users of legacy I2C (outside of SPL) have been
resolved, we can enable DM_I2C at the sunxi architecture level.

Reviewed-by: Heiko Schocher <hs at denx.de>
Signed-off-by: Samuel Holland <samuel at sholland.org>
---

Changes in v2:
- No changes

 arch/arm/Kconfig            | 1 +
 arch/arm/mach-sunxi/Kconfig | 3 ---
 2 files changed, 1 insertion(+), 3 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ebb19272708..d8c041a8773 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1028,6 +1028,7 @@ config ARCH_SUNXI
 	select DM
 	select DM_ETH
 	select DM_GPIO
+	select DM_I2C if I2C
 	select DM_KEYBOARD
 	select DM_MMC if MMC
 	select DM_SCSI if SCSI
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 99928821673..9047a88c9da 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -165,7 +165,6 @@ endif
 
 config MACH_SUNXI_H3_H5
 	bool
-	select DM_I2C
 	select PHY_SUN4I_USB
 	select SUNXI_DE2
 	select SUNXI_DRAM_DW
@@ -327,7 +326,6 @@ config MACH_SUN50I
 	bool "sun50i (Allwinner A64)"
 	select ARM64
 	select SPI
-	select DM_I2C
 	select DM_SPI if SPI
 	select DM_SPI_FLASH
 	select PHY_SUN4I_USB
@@ -923,7 +921,6 @@ config VIDEO_LCD_BL_PWM_ACTIVE_LOW
 config VIDEO_LCD_PANEL_I2C
 	bool "LCD panel needs to be configured via i2c"
 	depends on VIDEO_SUNXI
-	select DM_I2C
 	select DM_I2C_GPIO
 	---help---
 	Say y here if the LCD panel needs to be configured via i2c. This
-- 
2.32.0