[PATCH v2 5/7] arm64: dts: imx8mm-u-boot.dtsi: alphabetically re-order properties
Marcel Ziswiler
marcel at ziswiler.com
Fri Oct 8 23:02:33 CEST 2021
From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
Alphabetically re-order properties.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
---
Changes in v2:
- Rather than doing that clean-up to the separate binman dtsi now do it
to the common u-boot dtsi one.
arch/arm/dts/imx8mm-u-boot.dtsi | 34 ++++++++++++++++-----------------
1 file changed, 17 insertions(+), 17 deletions(-)
diff --git a/arch/arm/dts/imx8mm-u-boot.dtsi b/arch/arm/dts/imx8mm-u-boot.dtsi
index 5020255fa0f..770282d2b98 100644
--- a/arch/arm/dts/imx8mm-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-u-boot.dtsi
@@ -15,8 +15,8 @@
};
&aips1 {
- u-boot,dm-spl;
u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
};
&aips2 {
@@ -29,10 +29,10 @@
&binman {
u-boot-spl-ddr {
+ align = <4>;
+ align-size = <4>;
filename = "u-boot-spl-ddr.bin";
pad-byte = <0xff>;
- align-size = <4>;
- align = <4>;
u-boot-spl {
align-end = <4>;
@@ -76,17 +76,17 @@
fit {
description = "Configuration to load ATF before U-Boot";
- #address-cells = <1>;
fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>;
fit,fdt-list = "of-list";
+ #address-cells = <1>;
images {
uboot {
- description = "U-Boot (64-bit)";
- type = "standalone";
arch = "arm64";
compression = "none";
+ description = "U-Boot (64-bit)";
load = <CONFIG_SYS_TEXT_BASE>;
+ type = "standalone";
uboot_blob: blob-ext {
filename = "u-boot-nodtb.bin";
@@ -94,12 +94,12 @@
};
atf {
- description = "ARM Trusted Firmware";
- type = "firmware";
arch = "arm64";
compression = "none";
- load = <0x920000>;
+ description = "ARM Trusted Firmware";
entry = <0x920000>;
+ load = <0x920000>;
+ type = "firmware";
atf_blob: blob-ext {
filename = "bl31.bin";
@@ -107,17 +107,17 @@
};
binman_fip: fip {
- description = "Trusted Firmware FIP";
- type = "firmware";
arch = "arm64";
compression = "none";
+ description = "Trusted Firmware FIP";
load = <0x40310000>;
+ type = "firmware";
};
@fdt-SEQ {
+ compression = "none";
description = "NAME";
type = "flat_dt";
- compression = "none";
uboot_fdt_blob: blob-ext {
filename = "u-boot.dtb";
@@ -130,9 +130,9 @@
binman_configuration: @config-SEQ {
description = "NAME";
+ fdt = "fdt-SEQ";
firmware = "uboot";
loadables = "atf";
- fdt = "fdt-SEQ";
};
};
};
@@ -143,20 +143,20 @@
pad-byte = <0x00>;
spl: blob-ext at 1 {
- offset = <0x0>;
filename = "spl.bin";
+ offset = <0x0>;
};
binman_uboot: blob-ext at 2 {
- offset = <0x57c00>;
filename = "u-boot.itb";
+ offset = <0x57c00>;
};
};
};
&clk {
- u-boot,dm-spl;
u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
/delete-property/ assigned-clocks;
/delete-property/ assigned-clock-parents;
/delete-property/ assigned-clock-rates;
@@ -167,6 +167,6 @@
};
&osc_24m {
- u-boot,dm-spl;
u-boot,dm-pre-reloc;
+ u-boot,dm-spl;
};
--
2.26.2
More information about the U-Boot
mailing list