[PATCH v2 7/7] arm64: dts: imx8mm-u-boot.dtsi: improve odd blob-ext naming
Marcel Ziswiler
marcel at ziswiler.com
Fri Oct 8 23:02:35 CEST 2021
From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
Rather than using odd implicit blob-ext naming, explicitly specify the
type to be of blob-ext and therefore also simplify the node naming.
Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
---
Changes in v2:
- Rather than doing that clean-up to the separate binman dtsi now do it
to the common u-boot dtsi one.
Changes in v1:
- This was suggested by Simon on my earlier patch set upon which we
decided to first break this up into a common binman dtsi and then
subsequently do such further improvements.
arch/arm/dts/imx8mm-u-boot.dtsi | 27 ++++++++++++++++++---------
1 file changed, 18 insertions(+), 9 deletions(-)
diff --git a/arch/arm/dts/imx8mm-u-boot.dtsi b/arch/arm/dts/imx8mm-u-boot.dtsi
index 8feb0f2592a..7882fe73167 100644
--- a/arch/arm/dts/imx8mm-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-u-boot.dtsi
@@ -39,24 +39,28 @@
filename = "u-boot-spl.bin";
};
- blob_1: blob-ext at 1 {
+ 1d-imem {
filename = "lpddr4_pmu_train_1d_imem.bin";
size = <0x8000>;
+ type = "blob-ext";
};
- blob_2: blob-ext at 2 {
+ 1d_dmem {
filename = "lpddr4_pmu_train_1d_dmem.bin";
size = <0x4000>;
+ type = "blob-ext";
};
- blob_3: blob-ext at 3 {
+ 2d_imem {
filename = "lpddr4_pmu_train_2d_imem.bin";
size = <0x8000>;
+ type = "blob-ext";
};
- blob_4: blob-ext at 4 {
+ 2d_dmem {
filename = "lpddr4_pmu_train_2d_dmem.bin";
size = <0x4000>;
+ type = "blob-ext";
};
};
@@ -89,8 +93,9 @@
load = <CONFIG_SYS_TEXT_BASE>;
type = "standalone";
- uboot_blob: blob-ext {
+ uboot_blob {
filename = "u-boot-nodtb.bin";
+ type = "blob-ext";
};
};
@@ -102,8 +107,9 @@
load = <0x920000>;
type = "firmware";
- atf_blob: blob-ext {
+ atf_blob {
filename = "bl31.bin";
+ type = "blob-ext";
};
};
@@ -120,8 +126,9 @@
description = "NAME";
type = "flat_dt";
- uboot_fdt_blob: blob-ext {
+ uboot_fdt_blob {
filename = "u-boot.dtb";
+ type = "blob-ext";
};
};
};
@@ -143,14 +150,16 @@
filename = "flash.bin";
pad-byte = <0x00>;
- spl: blob-ext at 1 {
+ spl {
filename = "spl.bin";
offset = <0x0>;
+ type = "blob-ext";
};
- binman_uboot: blob-ext at 2 {
+ binman_uboot: uboot {
filename = "u-boot.itb";
offset = <0x57c00>;
+ type = "blob-ext";
};
};
};
--
2.26.2
More information about the U-Boot
mailing list