[PATCH 1/2] sunxi: add H2+ config option

Sat Oct 9 14:18:58 CEST 2021

Add H2+ Kconfig oiption to display proper cpu at boot time,
and for other future uses, if needed, to differentiate against H3.

The patch does not change any board defconfig at this stage,
so that nothing is broken.

Tested this CONFIG_MACH_SUN8I_H2_PLUS to work properly on
banana pi m2 zero.

Signed-off-by: Angelo Dureghello <angelo.dureghello at timesys.com>
---
 arch/arm/cpu/armv7/sunxi/Makefile           | 1 +
 arch/arm/cpu/armv7/sunxi/psci.c             | 2 ++
 arch/arm/cpu/armv7/sunxi/tzpc.c             | 2 +-
 arch/arm/dts/Makefile                       | 5 +++++
 arch/arm/include/asm/arch-sunxi/cpu_sun4i.h | 4 ++--
 arch/arm/mach-sunxi/Kconfig                 | 9 +++++++++
 arch/arm/mach-sunxi/board.c                 | 3 ++-
 arch/arm/mach-sunxi/cpu_info.c              | 6 ++++--
 arch/arm/mach-sunxi/dram_sunxi_dw.c         | 4 ++--
 drivers/clk/sunxi/Makefile                  | 1 +
 drivers/video/sunxi/sunxi_de2.c             | 2 +-
 11 files changed, 30 insertions(+), 9 deletions(-)

diff --git a/arch/arm/cpu/armv7/sunxi/Makefile b/arch/arm/cpu/armv7/sunxi/Makefile
index 1d40d6a18d..5fdfe45401 100644
--- a/arch/arm/cpu/armv7/sunxi/Makefile
+++ b/arch/arm/cpu/armv7/sunxi/Makefile
@@ -8,6 +8,7 @@
 obj-y	+= timer.o
 
 obj-$(CONFIG_MACH_SUN6I)	+= tzpc.o
+obj-$(CONFIG_MACH_SUN8I_H2_PLUS) += tzpc.o
 obj-$(CONFIG_MACH_SUN8I_H3)	+= tzpc.o
 
 ifndef CONFIG_SPL_BUILD
diff --git a/arch/arm/cpu/armv7/sunxi/psci.c b/arch/arm/cpu/armv7/sunxi/psci.c
index 1ac50f558a..bcdbe888bc 100644
--- a/arch/arm/cpu/armv7/sunxi/psci.c
+++ b/arch/arm/cpu/armv7/sunxi/psci.c
@@ -79,6 +79,7 @@ static void __secure __mdelay(u32 ms)
 static void __secure clamp_release(u32 __maybe_unused *clamp)
 {
 #if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || \
+	defined(CONFIG_MACH_SUN8I_H2_PLUS) || \
 	defined(CONFIG_MACH_SUN8I_H3) || \
 	defined(CONFIG_MACH_SUN8I_R40)
 	u32 tmp = 0x1ff;
@@ -94,6 +95,7 @@ static void __secure clamp_release(u32 __maybe_unused *clamp)
 static void __secure clamp_set(u32 __maybe_unused *clamp)
 {
 #if defined(CONFIG_MACH_SUN6I) || defined(CONFIG_MACH_SUN7I) || \
+	defined(CONFIG_MACH_SUN8I_H2_PLUS) || \
 	defined(CONFIG_MACH_SUN8I_H3) || \
 	defined(CONFIG_MACH_SUN8I_R40)
 	writel(0xff, clamp);
diff --git a/arch/arm/cpu/armv7/sunxi/tzpc.c b/arch/arm/cpu/armv7/sunxi/tzpc.c
index 0c86a21a3f..44640509ff 100644
--- a/arch/arm/cpu/armv7/sunxi/tzpc.c
+++ b/arch/arm/cpu/armv7/sunxi/tzpc.c
@@ -17,7 +17,7 @@ void tzpc_init(void)
 	writel(SUN6I_TZPC_DECPORT0_RTC, &tzpc->decport0_set);
 #endif
 
-#ifdef CONFIG_MACH_SUN8I_H3
+#if defined(CONFIG_MACH_SUN8I_H2_PLUS) || defined(CONFIG_MACH_SUN8I_H3)
 	/* Enable non-secure access to all peripherals */
 	writel(SUN8I_H3_TZPC_DECPORT0_ALL, &tzpc->decport0_set);
 	writel(SUN8I_H3_TZPC_DECPORT1_ALL, &tzpc->decport1_set);
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index b8a382d153..2e58815769 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -598,6 +598,11 @@ dtb-$(CONFIG_MACH_SUN8I_A83T) += \
 	sun8i-a83t-bananapi-m3.dtb \
 	sun8i-a83t-cubietruck-plus.dtb \
 	sun8i-a83t-tbs-a711.dtb
+dtb-$(CONFIG_MACH_SUN8I_H2_PLUS) += \
+	sun8i-h2-plus-bananapi-m2-zero.dtb \
+	sun8i-h2-plus-libretech-all-h3-cc.dtb \
+	sun8i-h2-plus-orangepi-r1.dtb \
+	sun8i-h2-plus-orangepi-zero.dtb
 dtb-$(CONFIG_MACH_SUN8I_H3) += \
 	sun8i-h2-plus-bananapi-m2-zero.dtb \
 	sun8i-h2-plus-libretech-all-h3-cc.dtb \
diff --git a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
index d4c795d89c..b7a66b91e7 100644
--- a/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
+++ b/arch/arm/include/asm/arch-sunxi/cpu_sun4i.h
@@ -15,7 +15,7 @@
     !defined(CONFIG_MACH_SUN8I_R40) && \
     !defined(CONFIG_MACH_SUN8I_V3S)
 #define SUNXI_SRAM_A2_BASE		0x00040000
-#ifdef CONFIG_MACH_SUN8I_H3
+#if defined(CONFIG_MACH_SUN8I_H2_PLUS) || defined(CONFIG_MACH_SUN8I_H3)
 #define SUNXI_SRAM_A2_SIZE		(48 * 1024)	/* 16+32 kiB */
 #else
 #define SUNXI_SRAM_A2_SIZE		(80 * 1024)	/* 16+64 kiB */
@@ -174,7 +174,7 @@ defined(CONFIG_MACH_SUN50I)
 /* module sram */
 #define SUNXI_SRAM_C_BASE		0x01d00000
 
-#ifndef CONFIG_MACH_SUN8I_H3
+#if !defined(CONFIG_MACH_SUN8I_H2_PLUS) && !defined(CONFIG_MACH_SUN8I_H3)
 #define SUNXI_DE_FE0_BASE		0x01e00000
 #else
 #define SUNXI_TVE0_BASE			0x01e00000
diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig
index 1d4a4fdd0c..eae8a0e68b 100644
--- a/arch/arm/mach-sunxi/Kconfig
+++ b/arch/arm/mach-sunxi/Kconfig
@@ -288,6 +288,15 @@ config MACH_SUN8I_A83T
 	select MMC_SUNXI_HAS_MODE_SWITCH
 	select SUPPORT_SPL
 
+config MACH_SUN8I_H2_PLUS
+	bool "sun8i (Allwinner H2+)"
+	select CPU_V7A
+	select CPU_V7_HAS_NONSEC
+	select CPU_V7_HAS_VIRT
+	select ARCH_SUPPORT_PSCI
+	select MACH_SUNXI_H3_H5
+	select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
+
 config MACH_SUN8I_H3
 	bool "sun8i (Allwinner H3)"
 	select CPU_V7A
diff --git a/arch/arm/mach-sunxi/board.c b/arch/arm/mach-sunxi/board.c
index d9b04f75fc..adb63e93e7 100644
--- a/arch/arm/mach-sunxi/board.c
+++ b/arch/arm/mach-sunxi/board.c
@@ -228,7 +228,8 @@ void s_init(void)
 		"mcr p15, 0, r0, c1, c0, 1\n"
 		::: "r0");
 #endif
-#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I_H3
+#if defined CONFIG_MACH_SUN6I || defined CONFIG_MACH_SUN8I_H2_PLUS || \
+	defined CONFIG_MACH_SUN8I_H3
 	/* Enable non-secure access to some peripherals */
 	tzpc_init();
 #endif
diff --git a/arch/arm/mach-sunxi/cpu_info.c b/arch/arm/mach-sunxi/cpu_info.c
index ba33ef2430..429e5ce283 100644
--- a/arch/arm/mach-sunxi/cpu_info.c
+++ b/arch/arm/mach-sunxi/cpu_info.c
@@ -85,6 +85,8 @@ int print_cpuinfo(void)
 	printf("CPU:   Allwinner A33 (SUN8I %04x)\n", sunxi_get_sram_id());
 #elif defined CONFIG_MACH_SUN8I_A83T
 	printf("CPU:   Allwinner A83T (SUN8I %04x)\n", sunxi_get_sram_id());
+#elif defined CONFIG_MACH_SUN8I_H2_PLUS
+	printf("CPU:   Allwinner H2+ (SUN8I %04x)\n", sunxi_get_sram_id());
 #elif defined CONFIG_MACH_SUN8I_H3
 	printf("CPU:   Allwinner H3 (SUN8I %04x)\n", sunxi_get_sram_id());
 #elif defined CONFIG_MACH_SUN8I_R40
@@ -109,7 +111,7 @@ int print_cpuinfo(void)
 }
 #endif
 
-#ifdef CONFIG_MACH_SUN8I_H3
+#if defined(CONFIG_MACH_SUN8I_H2_PLUS) || defined(CONFIG_MACH_SUN8I_H3)
 
 #define SIDC_PRCTL 0x40
 #define SIDC_RDKEY 0x60
@@ -143,7 +145,7 @@ int sunxi_get_sid(unsigned int *sid)
 {
 #ifdef CONFIG_AXP221_POWER
 	return axp_get_sid(sid);
-#elif defined CONFIG_MACH_SUN8I_H3
+#elif defined(CONFIG_MACH_SUN8I_H2_PLUS) || defined(CONFIG_MACH_SUN8I_H3)
 	/*
 	 * H3 SID controller has a bug, which makes the initial value of
 	 * SUNXI_SID_BASE at boot wrong.
diff --git a/arch/arm/mach-sunxi/dram_sunxi_dw.c b/arch/arm/mach-sunxi/dram_sunxi_dw.c
index 9107b114df..f28c23d0c6 100644
--- a/arch/arm/mach-sunxi/dram_sunxi_dw.c
+++ b/arch/arm/mach-sunxi/dram_sunxi_dw.c
@@ -863,7 +863,7 @@ unsigned long sunxi_dram_init(void)
 			}
 		},
 
-#if defined(CONFIG_MACH_SUN8I_H3)
+#if defined(CONFIG_MACH_SUN8I_H2_PLUS) || defined(CONFIG_MACH_SUN8I_H3)
 		.dx_read_delays  = SUN8I_H3_DX_READ_DELAYS,
 		.dx_write_delays = SUN8I_H3_DX_WRITE_DELAYS,
 		.ac_delays	 = SUN8I_H3_AC_DELAYS,
@@ -890,7 +890,7 @@ unsigned long sunxi_dram_init(void)
  * the static functions. This saves us #ifdefs, but still keeps the binary
  * small.
  */
-#if defined(CONFIG_MACH_SUN8I_H3)
+#if defined(CONFIG_MACH_SUN8I_H2_PLUS) || defined(CONFIG_MACH_SUN8I_H3)
 	uint16_t socid = SOCID_H3;
 #elif defined(CONFIG_MACH_SUN8I_R40)
 	uint16_t socid = SOCID_R40;
diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile
index 4f9282a8b9..d8565b3946 100644
--- a/drivers/clk/sunxi/Makefile
+++ b/drivers/clk/sunxi/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_CLK_SUN8I_A83T) += clk_a83t.o
 obj-$(CONFIG_CLK_SUN8I_R40) += clk_r40.o
 obj-$(CONFIG_CLK_SUN8I_V3S) += clk_v3s.o
 obj-$(CONFIG_CLK_SUN9I_A80) += clk_a80.o
+obj-$(CONFIG_CLK_SUN8I_H2_PLUS) += clk_h3.o
 obj-$(CONFIG_CLK_SUN8I_H3) += clk_h3.o
 obj-$(CONFIG_CLK_SUN50I_H6) += clk_h6.o
 obj-$(CONFIG_CLK_SUN50I_H616) += clk_h616.o
diff --git a/drivers/video/sunxi/sunxi_de2.c b/drivers/video/sunxi/sunxi_de2.c
index e02d359cd2..2af2ae4cac 100644
--- a/drivers/video/sunxi/sunxi_de2.c
+++ b/drivers/video/sunxi/sunxi_de2.c
@@ -84,7 +84,7 @@ static void sunxi_de2_mode_set(int mux, const struct display_timing *mode,
 	u32 format;
 
 	/* enable clock */
-#ifdef CONFIG_MACH_SUN8I_H3
+#if defined(CONFIG_MACH_SUN8I_H2_PLUS) || defined(CONFIG_MACH_SUN8I_H3)
 	setbits_le32(&de_clk_regs->rst_cfg, (mux == 0) ? 1 : 4);
 #else
 	setbits_le32(&de_clk_regs->rst_cfg, BIT(mux));
-- 
2.32.0

