[PATCH v6 02/11] verdin-imx8mm: fix ethernet

[Marcel Ziswiler]

From: Marcel Ziswiler <marcel.ziswiler at toradex.com>

Turns out Microship (formerly Micrel) meanwhile integrated proper
support for the DLL setup on their KSZ9131. Unfortunately, this
conflicts with our previous board code doing that.
Fix this by getting rid of our board code and just relying on the
generic implementation relying on rgmii-id being used as phy-mode.

Fixes: commit c6df0e2ffdc4
       ("net: phy: micrel: add support for DLL setup on ksz9131")
Fixes: commit af2d3c91d877
       ("ARM: dts: imx8mm-verdin: Set PHY mode to RGMII-ID")
Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
Reviewed-by: Fabio Estevam <festevam at gmail.com>

---

(no changes since v5)

Changes in v5:
- Drop device tree part already done by Marek's patch.
- Add another fixes tag as his patch forgot the board code part.

 board/toradex/verdin-imx8mm/verdin-imx8mm.c | 64 ---------------------
 1 file changed, 64 deletions(-)

diff --git a/board/toradex/verdin-imx8mm/verdin-imx8mm.c b/board/toradex/verdin-imx8mm/verdin-imx8mm.c
index 76f4a1e209a..1644f4b3081 100644
--- a/board/toradex/verdin-imx8mm/verdin-imx8mm.c
+++ b/board/toradex/verdin-imx8mm/verdin-imx8mm.c
@@ -36,70 +36,6 @@ static int setup_fec(void)
 
 	return 0;
 }
-
-int board_phy_config(struct phy_device *phydev)
-{
-	int tmp;
-
-	switch (ksz9xx1_phy_get_id(phydev) & MII_KSZ9x31_SILICON_REV_MASK) {
-	case PHY_ID_KSZ9031:
-		/*
-		 * The PHY adds 1.2ns for the RXC and 0ns for TXC clock by
-		 * default. The MAC and the layout don't add a skew between
-		 * clock and data.
-		 * Add 0.3ns for the RXC path and 0.96 + 0.42 ns (1.38 ns) for
-		 * the TXC path to get the required clock skews.
-		 */
-		/* control data pad skew - devaddr = 0x02, register = 0x04 */
-		ksz9031_phy_extended_write(phydev, 0x02,
-					   MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW,
-					   MII_KSZ9031_MOD_DATA_NO_POST_INC,
-					   0x0070);
-		/* rx data pad skew - devaddr = 0x02, register = 0x05 */
-		ksz9031_phy_extended_write(phydev, 0x02,
-					   MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW,
-					   MII_KSZ9031_MOD_DATA_NO_POST_INC,
-					   0x7777);
-		/* tx data pad skew - devaddr = 0x02, register = 0x06 */
-		ksz9031_phy_extended_write(phydev, 0x02,
-					   MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW,
-					   MII_KSZ9031_MOD_DATA_NO_POST_INC,
-					   0x0000);
-		/* gtx and rx clock pad skew - devaddr = 0x02,register = 0x08 */
-		ksz9031_phy_extended_write(phydev, 0x02,
-					   MII_KSZ9031_EXT_RGMII_CLOCK_SKEW,
-					   MII_KSZ9031_MOD_DATA_NO_POST_INC,
-					   0x03f4);
-		break;
-	case PHY_ID_KSZ9131:
-	default:
-		/* read rxc dll control - devaddr = 0x2, register = 0x4c */
-		tmp = ksz9031_phy_extended_read(phydev, 0x02,
-					MII_KSZ9131_EXT_RGMII_2NS_SKEW_RXDLL,
-					MII_KSZ9031_MOD_DATA_NO_POST_INC);
-		/* disable rxdll bypass (enable 2ns skew delay on RXC) */
-		tmp &= ~MII_KSZ9131_RXTXDLL_BYPASS;
-		/* rxc data pad skew 2ns - devaddr = 0x02, register = 0x4c */
-		tmp = ksz9031_phy_extended_write(phydev, 0x02,
-					MII_KSZ9131_EXT_RGMII_2NS_SKEW_RXDLL,
-					MII_KSZ9031_MOD_DATA_NO_POST_INC, tmp);
-		/* read txc dll control - devaddr = 0x02, register = 0x4d */
-		tmp = ksz9031_phy_extended_read(phydev, 0x02,
-					MII_KSZ9131_EXT_RGMII_2NS_SKEW_TXDLL,
-					MII_KSZ9031_MOD_DATA_NO_POST_INC);
-		/* disable txdll bypass (enable 2ns skew delay on TXC) */
-		tmp &= ~MII_KSZ9131_RXTXDLL_BYPASS;
-		/* rxc data pad skew 2ns - devaddr = 0x02, register = 0x4d */
-		tmp = ksz9031_phy_extended_write(phydev, 0x02,
-					MII_KSZ9131_EXT_RGMII_2NS_SKEW_TXDLL,
-					MII_KSZ9031_MOD_DATA_NO_POST_INC, tmp);
-		break;
-	}
-
-	if (phydev->drv->config)
-		phydev->drv->config(phydev);
-	return 0;
-}
 #endif
 
 int board_init(void)
-- 
2.26.2