[PATCH v3] board: ea: mx7ulp_com: move setting CONFIG_BOOTCOMMAND to defconfig

Oleksandr Suvorov oleksandr.suvorov at foundries.io
Mon Oct 11 19:13:28 CEST 2021


From: Ricardo Salveti <ricardo at foundries.io>

Move setting CONFIG_BOOTCOMMAND to the mx7ulp_com_defconfig file.
It also allows replacing the default CONFIG_BOOTCOMMAND without
code modification.

Signed-off-by: Ricardo Salveti <ricardo at foundries.io>
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov at foundries.io>
---

Changes in v3:
- rebased on top of 49c8ef0e45 ("Convert CONFIG_SYS_LOAD_ADDR to Kconfig")

Changes in v2:
- move setting the command to defconfig

 configs/mx7ulp_com_defconfig | 2 ++
 include/configs/mx7ulp_com.h | 5 -----
 2 files changed, 2 insertions(+), 5 deletions(-)

diff --git a/configs/mx7ulp_com_defconfig b/configs/mx7ulp_com_defconfig
index 6e6b821d90..d57d1a2ed3 100644
--- a/configs/mx7ulp_com_defconfig
+++ b/configs/mx7ulp_com_defconfig
@@ -10,6 +10,8 @@ CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-com"
 CONFIG_LDO_ENABLED_MODE=y
 CONFIG_TARGET_MX7ULP_COM=y
 CONFIG_SYS_LOAD_ADDR=0x60800000
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="if run loadimage; then run mmcboot; fi"
 CONFIG_DEFAULT_FDT_FILE="imx7ulp-com"
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_HUSH_PARSER=y
diff --git a/include/configs/mx7ulp_com.h b/include/configs/mx7ulp_com.h
index 48172de1d0..58d48edac4 100644
--- a/include/configs/mx7ulp_com.h
+++ b/include/configs/mx7ulp_com.h
@@ -60,11 +60,6 @@
 			"bootz ${loadaddr} - ${fdt_addr}; " \
 		"fi;\0" \
 
-#define CONFIG_BOOTCOMMAND \
-	"if run loadimage; then " \
-		"run mmcboot; " \
-	"fi; " \
-
 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
 #define CONFIG_SYS_INIT_RAM_SIZE	SZ_256K
 
-- 
2.31.1



More information about the U-Boot mailing list