[PATCH v6 00/11] board: toradex: verdin-imx8mm: target refresh

[Tim Harvey]

On Sat, Oct 9, 2021 at 1:43 PM Marcel Ziswiler <marcel at ziswiler.com> wrote:
>
> From: Marcel Ziswiler <marcel.ziswiler at toradex.com>
>
>
> An assortment of fixes and improvements like an Ethernet PHY
> configuration fix, DEK blob encapsulation preparation, migration to
> using binman to pack images, SLEEP_MOCI# enablement, dropping of V1.0
> hardware support [1], renaming kernel image variable, using preboot
> for fdtfile evaluation and watchdog pinctrl fix.
>
> Note that this series is applied on top of Peng's Makefile fix [2] as
> otherwise, it may not quite generate all binman artefacts in the right
> order as discussed here [3].
>
> [1] https://developer.toradex.com/verdin-sample-phase-over
> [2] https://marc.info/?l=u-boot&m=162908373904742
> [3] https://marc.info/?l=u-boot&m=162945614207220
>
> Changes in v6:
> - New patch re-ordering fdt nodes and properties.
> - Update commit message as requested by Wolfgang.
>
> Changes in v5:
> - Drop device tree part already done by Marek's patch.
> - Add another fixes tag as his patch forgot the board code part.
> - Re-based on top of u-boot-imx, master yet again.
>
> Changes in v4:
> - Add Heiko Schocher's reviewed-by tag.
> - Fix copyright periods.
> - Re-based.
>
> Changes in v3:
> - Case fold hex string.
> - Revert binman part of imx8mm-verdin-u-boot.dtsi to a plain copy from
>   imx8mm-evk and postpone further improvements to after migrating to a
>   common binman config as agreed with Frieder and Simon.
> - New patch cleaning up include order.
> - Add Fabio's reviewed-by tag.
> - Fix patch.
> - Add missing apalis-imx8 part.
> - While at it update copyright year resp. period.
> - Fix closing endif comment.
>
> Changes in v2:
> - Explicitly pass filename to binman when generating binaries as
>   suggested by Heiko.
> - Use proper intermediate binary u-boot-spl-ddr.bin for imximage as
>   pointed out by Heiko.
> - Drop first patch ("imx: mkimage_fit_atf: fix legacy image generation")
>   as a similar fix was already refused earlier.
> - New patch allows booting recent embedded Linux BSPs.
> - New patch addressing dynamic fdtfile definition.
> - New patch fixing watchdog pinctrl issue.
>
> Igor Opaniuk (1):
>   verdin-imx8mm: use preboot for fdtfile evaluation
>
> Marcel Ziswiler (7):
>   imx8m: clean-up kconfig indentation
>   verdin-imx8mm: fix ethernet
>   ARM: dts: imx8mm-verdin: prepare for dek blob encapsulation
>   arm64: dts: imx8mm-verdin-u-boot.dtsi: alphabetically re-order
>   verdin-imx8mm: switch to use binman to pack images
>   verdin-imx8mm: clean-up include order
>   verdin-imx8mm: fix watchdog pinctrl issue
>
> Max Krummenacher (2):
>   verdin-imx8mm: enable sleep_moci output
>   verdin-imx8mm: drop support for v1.0 hardware
>
> Oleksandr Suvorov (1):
>   include/configs: apalis-imx8/verdin-imx8mm: rename kernel image
>     variable
>
>  arch/arm/dts/imx8mm-verdin-u-boot.dtsi      | 147 +++++++++++++++++++-
>  arch/arm/dts/imx8mm-verdin.dts              |  18 +++
>  arch/arm/mach-imx/imx8m/Kconfig             |  21 +--
>  board/toradex/verdin-imx8mm/imximage.cfg    |  11 +-
>  board/toradex/verdin-imx8mm/verdin-imx8mm.c |  81 +----------
>  configs/verdin-imx8mm_defconfig             |   6 +-
>  doc/board/toradex/verdin-imx8mm.rst         |  53 ++++---
>  include/configs/apalis-imx8.h               |   6 +-
>  include/configs/verdin-imx8mm.h             |  10 +-
>  9 files changed, 220 insertions(+), 133 deletions(-)
>
> --
> 2.26.2
>

Marcel,

I've tested your series with mx8mm-venice and did not see any issues.

Tested-by: Tim Harvey <tharvey at gateworks.com> for imx8mm-venice-* boards

Thanks, the common u-boot.dtsi is nice to see!

I have a couple of patches that have not been picked up by Stefano yet
due to I believe merge conflicts becuase his imx tree is behind master
with respect to some of the Kconfig patches. You are likely in the
same boat.

Stefano, is it best for me to rebase my 'imx8mm_venice: switch to use
binman to pack images' and 'board: gateworks: venice: add
imx8mn-gw7902 support' patches on your tree or are you going to be
merging in origin/master soon?

Best regards,

Tim