[PATCH v5 25/28] arm: dts: ls1028a: move the PCI I/O window to match

Michael Walle michael at walle.cc
Wed Oct 13 18:14:24 CEST 2021


To make the synchronization of the u-boot device tree with the one from
linux easier, move the I/O window to the one which is specified in the
linux device tree. The actual value shouldn't matter as long as it
mapped to the corresponding memory window of the PCIe controller which
is a 32GiB window at 80_0000_0000h (first controller) or 88_0000_0000h
(second controller).

Signed-off-by: Michael Walle <michael at walle.cc>
Reviewed-by: Hou Zhiqiang <Zhiqiang.Hou at nxp.com>
---
 arch/arm/dts/fsl-ls1028a.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/dts/fsl-ls1028a.dtsi b/arch/arm/dts/fsl-ls1028a.dtsi
index 3ef710bb3d..f11e75032b 100644
--- a/arch/arm/dts/fsl-ls1028a.dtsi
+++ b/arch/arm/dts/fsl-ls1028a.dtsi
@@ -352,7 +352,7 @@
 			#size-cells = <2>;
 			device_type = "pci";
 			bus-range = <0x0 0xff>;
-			ranges = <0x81000000 0x0 0x00000000 0x80 0x00020000 0x0 0x00010000   /* downstream I/O */
+			ranges = <0x81000000 0x0 0x00000000 0x80 0x00010000 0x0 0x00010000   /* downstream I/O */
 				  0x82000000 0x0 0x40000000 0x80 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 		};
 
@@ -365,7 +365,7 @@
 			#size-cells = <2>;
 			device_type = "pci";
 			bus-range = <0x0 0xff>;
-			ranges = <0x81000000 0x0 0x00000000 0x88 0x00020000 0x0 0x00010000   /* downstream I/O */
+			ranges = <0x81000000 0x0 0x00000000 0x88 0x00010000 0x0 0x00010000   /* downstream I/O */
 				  0x82000000 0x0 0x40000000 0x88 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
 		};
 
-- 
2.30.2



More information about the U-Boot mailing list