[PATCH] mmc: rockchip_sdhci: enable strobe line for HS400

[Kever Yang]

On 2021/10/15 下午4:41, Yifeng Zhao wrote:
> The default configuration of rk3399 EMMC PHY does not enable the
> strobe line, and EMMC controller will got data transmission error
> at HS400 mode.
>
> Signed-off-by: Yifeng Zhao <yifeng.zhao at rock-chips.com>

Reviewed-by: Kever Yang <kever.yang at rock-chips.com>


Thanks,
- Kever
> ---
>
>   drivers/mmc/rockchip_sdhci.c | 3 +++
>   1 file changed, 3 insertions(+)
>
> diff --git a/drivers/mmc/rockchip_sdhci.c b/drivers/mmc/rockchip_sdhci.c
> index 1ac00587d4..278473899c 100644
> --- a/drivers/mmc/rockchip_sdhci.c
> +++ b/drivers/mmc/rockchip_sdhci.c
> @@ -143,6 +143,9 @@ static void rk3399_emmc_phy_power_on(struct rockchip_emmc_phy *phy, u32 clock)
>   	writel(RK_CLRSETBITS(3 << 12, freqsel << 12), &phy->emmcphy_con[0]);
>   	writel(RK_CLRSETBITS(1 << 1, 1 << 1), &phy->emmcphy_con[6]);
>   
> +	/* REN Enable on STRB Line for HS400 */
> +	writel(RK_CLRSETBITS(0, 1 << 9), &phy->emmcphy_con[2]);
> +
>   	read_poll_timeout(readl, &phy->emmcphy_status, dllrdy,
>   			  PHYCTRL_DLL_LOCK_WO_TMOUT(dllrdy), 1, 5000);
>   }