[PATCH v2 01/10] net: tsec: add support for promiscuous mode

Ramon Fried rfried.dev at gmail.com
Sat Oct 16 20:30:18 CEST 2021


On Wed, Sep 29, 2021 at 6:05 PM Vladimir Oltean <vladimir.oltean at nxp.com> wrote:
>
> The Freescale TSEC can be a DSA master, and the ports of the attached
> DSA switch can have different MAC addresses compared to the TSEC.
> Nonetheless, the TSEC must receive the packets on behalf of those switch
> ports. Therefore, implement the promiscuous mode method to allow DSA to
> set this.
>
> Note that the init_registers() function called from eth_ops :: start
> overwrites this setting. There is no reason why the RCTRL register
> should be zero-initialized, so just stop clearing it so that the setting
> we applied in eth_ops :: set_promisc sticks.
>
> Signed-off-by: Vladimir Oltean <vladimir.oltean at nxp.com>
> Reviewed-by: Ramon Fried <rfried.dev at gmail.com>
> Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
> ---
> v1->v2: none
>
>  drivers/net/tsec.c | 20 ++++++++++++++++----
>  include/tsec.h     |  2 ++
>  2 files changed, 18 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/net/tsec.c b/drivers/net/tsec.c
> index 0ce97656715f..4354753cab9c 100644
> --- a/drivers/net/tsec.c
> +++ b/drivers/net/tsec.c
> @@ -156,6 +156,19 @@ static int tsec_mcast_addr(struct udevice *dev, const u8 *mcast_mac, int join)
>         return 0;
>  }
>
> +static int tsec_set_promisc(struct udevice *dev, bool enable)
> +{
> +       struct tsec_private *priv = dev_get_priv(dev);
> +       struct tsec __iomem *regs = priv->regs;
> +
> +       if (enable)
> +               setbits_be32(&regs->rctrl, RCTRL_PROM);
> +       else
> +               clrbits_be32(&regs->rctrl, RCTRL_PROM);
> +
> +       return 0;
> +}
> +
>  /*
>   * Initialized required registers to appropriate values, zeroing
>   * those we don't care about (unless zero is bad, in which case,
> @@ -186,8 +199,6 @@ static void init_registers(struct tsec __iomem *regs)
>         out_be32(&regs->hash.gaddr6, 0);
>         out_be32(&regs->hash.gaddr7, 0);
>
> -       out_be32(&regs->rctrl, 0x00000000);
> -
>         /* Init RMON mib registers */
>         memset((void *)&regs->rmon, 0, sizeof(regs->rmon));
>
> @@ -454,7 +465,7 @@ void redundant_init(struct tsec_private *priv)
>                 0x71, 0x72};
>
>         /* Enable promiscuous mode */
> -       setbits_be32(&regs->rctrl, 0x8);
> +       setbits_be32(&regs->rctrl, RCTRL_PROM);
>         /* Enable loopback mode */
>         setbits_be32(&regs->maccfg1, MACCFG1_LOOPBACK);
>         /* Enable transmit and receive */
> @@ -506,7 +517,7 @@ void redundant_init(struct tsec_private *priv)
>         if (fail)
>                 panic("eTSEC init fail!\n");
>         /* Disable promiscuous mode */
> -       clrbits_be32(&regs->rctrl, 0x8);
> +       clrbits_be32(&regs->rctrl, RCTRL_PROM);
>         /* Disable loopback mode */
>         clrbits_be32(&regs->maccfg1, MACCFG1_LOOPBACK);
>  }
> @@ -932,6 +943,7 @@ static const struct eth_ops tsec_ops = {
>         .free_pkt = tsec_free_pkt,
>         .stop = tsec_halt,
>         .mcast = tsec_mcast_addr,
> +       .set_promisc = tsec_set_promisc,
>  };
>
>  static struct tsec_data etsec2_data = {
> diff --git a/include/tsec.h b/include/tsec.h
> index 5433cfd96610..044ee35a91bd 100644
> --- a/include/tsec.h
> +++ b/include/tsec.h
> @@ -122,6 +122,8 @@
>  #define ECNTRL_REDUCED_MII_MODE        0x00000004
>  #define ECNTRL_SGMII_MODE      0x00000002
>
> +#define RCTRL_PROM             0x00000008
> +
>  #ifndef CONFIG_SYS_TBIPA_VALUE
>  # define CONFIG_SYS_TBIPA_VALUE        0x1f
>  #endif
> --
> 2.25.1
>
Reviewed-by: Ramon Fried <rfried.dev at gmail.com>


More information about the U-Boot mailing list