[PATCH] mmc: rockchip_sdhci: enable strobe line for HS400

[赵仪峰]

Hi Jaehoon

> Just wonder about doesn't it affect to other mode?

The strobe line will only be used in hs400 mode and will not affect other modes.
 
Best Regards,
Yifeng Zhao 
 
>
On 10/15/21 5:41 PM, Yifeng Zhao wrote:
> The default configuration of rk3399 EMMC PHY does not enable the
> strobe line, and EMMC controller will got data transmission error
> at HS400 mode.
> 
> Signed-off-by: Yifeng Zhao <yifeng.zhao at rock-chips.com>
> ---
> 
>  drivers/mmc/rockchip_sdhci.c | 3 +++
>  1 file changed, 3 insertions(+)
> 
> diff --git a/drivers/mmc/rockchip_sdhci.c b/drivers/mmc/rockchip_sdhci.c
> index 1ac00587d4..278473899c 100644
> --- a/drivers/mmc/rockchip_sdhci.c
> +++ b/drivers/mmc/rockchip_sdhci.c
> @@ -143,6 +143,9 @@ static void rk3399_emmc_phy_power_on(struct rockchip_emmc_phy *phy, u32 clock)
>  writel(RK_CLRSETBITS(3 << 12, freqsel << 12), &phy->emmcphy_con[0]);
>  writel(RK_CLRSETBITS(1 << 1, 1 << 1), &phy->emmcphy_con[6]);
>  
> + /* REN Enable on STRB Line for HS400 */
> + writel(RK_CLRSETBITS(0, 1 << 9), &phy->emmcphy_con[2]);
> +
 
Just wonder about doesn't it affect to other mode? 
 
 
Best Regards,
Jaehoon Chung
 
>  read_poll_timeout(readl, &phy->emmcphy_status, dllrdy,
>    PHYCTRL_DLL_LOCK_WO_TMOUT(dllrdy), 1, 5000);
>  }
>