[PATCH 0/9] phyCORE-i.MX8MM Updates

[Stefano Babic]

On 06.10.21 11:56, Teresa Remmet wrote:
> This patchstack contains mainly cleanup for phyCORE-i.MX8MM but
> also adds:
> * SPI NOR flash support
> * clk command
> * binman support
> 
> Teresa
> 
> Teresa Remmet (9):
>    board: phytec: phycore_imx8mm: Clean up spl
>    include: configs: phycore_imx8mm: Remove hard coded network settings
>    include: configs: phycore-imx8mm: Remove not needed defines
>    include: configs: phycore-imx8mm: Do not use macro for address
>    arm: dts: phycore-imx8mm-u-boot: Add wdog pinctrl entry
>    arm: dts: phycore-imx8mm: Fix property
>    board: phytec: phycore-imx8mm: Add SPI-NOR flash support
>    configs: phycore-imx8mm_defconfig: Enable clk command
>    board: phytec: imx8mm-phycore: Switch to binman
> 
>   arch/arm/dts/phycore-imx8mm-u-boot.dtsi       | 126 ++++++++++++++++++
>   arch/arm/dts/phycore-imx8mm.dts               |  30 ++++-
>   arch/arm/mach-imx/imx8m/Kconfig               |   1 +
>   board/phytec/phycore_imx8mm/Kconfig           |   2 +-
>   .../phytec/phycore_imx8mm/imximage-8mm-sd.cfg |   9 ++
>   board/phytec/phycore_imx8mm/spl.c             |  19 +--
>   configs/phycore-imx8mm_defconfig              |  22 ++-
>   include/configs/phycore_imx8mm.h              |  18 +--
>   8 files changed, 191 insertions(+), 36 deletions(-)
>   create mode 100644 board/phytec/phycore_imx8mm/imximage-8mm-sd.cfg
> 

For all series:

Reviewed-by: Stefano Babic <sbabic at denx.de>

Regards,
Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================