[RFC PATCH 21/23] pwm: sunxi: Remove non-DM pin setup

[Samuel Holland]

This is now handled automatically by the pinctrl driver.

Signed-off-by: Samuel Holland <samuel at sholland.org>
---

 arch/arm/include/asm/arch-sunxi/gpio.h |  1 -
 drivers/pwm/sunxi_pwm.c                | 11 -----------
 2 files changed, 12 deletions(-)

diff --git a/arch/arm/include/asm/arch-sunxi/gpio.h b/arch/arm/include/asm/arch-sunxi/gpio.h
index 7c44302b8b..4e3c39a640 100644
--- a/arch/arm/include/asm/arch-sunxi/gpio.h
+++ b/arch/arm/include/asm/arch-sunxi/gpio.h
@@ -158,7 +158,6 @@ enum sunxi_gpio_number {
 
 #define SUNXI_GPD_LCD0		2
 #define SUNXI_GPD_LVDS0		3
-#define SUNXI_GPD_PWM		2
 
 #define SUNXI_GPF_SDC0		2
 #define SUNXI_GPF_UART0		4
diff --git a/drivers/pwm/sunxi_pwm.c b/drivers/pwm/sunxi_pwm.c
index e3d5ee456b..bb1bec05ec 100644
--- a/drivers/pwm/sunxi_pwm.c
+++ b/drivers/pwm/sunxi_pwm.c
@@ -13,7 +13,6 @@
 #include <asm/global_data.h>
 #include <asm/io.h>
 #include <asm/arch/pwm.h>
-#include <asm/arch/gpio.h>
 #include <power/regulator.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -45,14 +44,6 @@ static const u32 prescaler_table[] = {
 	1,	/* 1111 */
 };
 
-static int sunxi_pwm_config_pinmux(void)
-{
-#ifdef CONFIG_MACH_SUN50I
-	sunxi_gpio_set_cfgpin(SUNXI_GPD(22), SUNXI_GPD_PWM);
-#endif
-	return 0;
-}
-
 static int sunxi_pwm_set_invert(struct udevice *dev, uint channel,
 				bool polarity)
 {
@@ -137,8 +128,6 @@ static int sunxi_pwm_set_enable(struct udevice *dev, uint channel, bool enable)
 		return 0;
 	}
 
-	sunxi_pwm_config_pinmux();
-
 	if (priv->invert)
 		v &= ~SUNXI_PWM_CTRL_CH0_ACT_STA;
 	else
-- 
2.32.0