[PATCH v1 2/2] x86: edison: Don't take SD card detect pin into consideration

[Andy Shevchenko]

On Thu, Oct 21, 2021 at 12:41 AM Ferry Toth <fntoth at gmail.com> wrote:
> Op 15-10-2021 om 19:11 schreef Andy Shevchenko:
> > There are two PCB designs in the wild which use the opposite
> > signaling for SD card detect. This makes U-Boot working in one case
> > and failing in the other. Quirk this out by disconnecting SD card
> > detect pin from the PCB by switching to mode 3.
> >
> Tested-by: Ferry Toth <ftoth at exalondelft.nl> @ Intel Edison-Arduino board

Thank you, Ferry. And AFAICS the original reporter had confirmed that
this fixes the issue on his SparkFun board.

Bin, can this be reviewed and applied?

-- 
With Best Regards,
Andy Shevchenko