[PATCH v3 7/7] arm64: dts: imx8mm-u-boot.dtsi: improve odd blob-ext naming

Marcel Ziswiler marcel at ziswiler.com
Sat Oct 23 01:15:16 CEST 2021


From: Marcel Ziswiler <marcel.ziswiler at toradex.com>

Rather than using odd implicit blob-ext naming, explicitly specify the
type to be of blob-ext and therefore also simplify the node naming.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler at toradex.com>
Reviewed-by: Peng Fan <peng.fan at nxp.com>

---

(no changes since v2)

Changes in v2:
- Rather than doing that clean-up to the separate binman dtsi now do it
  to the common u-boot dtsi one.

Changes in v1:
- This was suggested by Simon on my earlier patch set upon which we
  decided to first break this up into a common binman dtsi and then
  subsequently do such further improvements.

 arch/arm/dts/imx8mm-u-boot.dtsi | 27 ++++++++++++++++++---------
 1 file changed, 18 insertions(+), 9 deletions(-)

diff --git a/arch/arm/dts/imx8mm-u-boot.dtsi b/arch/arm/dts/imx8mm-u-boot.dtsi
index 8feb0f2592a..7882fe73167 100644
--- a/arch/arm/dts/imx8mm-u-boot.dtsi
+++ b/arch/arm/dts/imx8mm-u-boot.dtsi
@@ -39,24 +39,28 @@
 			filename = "u-boot-spl.bin";
 		};
 
-		blob_1: blob-ext at 1 {
+		1d-imem {
 			filename = "lpddr4_pmu_train_1d_imem.bin";
 			size = <0x8000>;
+			type = "blob-ext";
 		};
 
-		blob_2: blob-ext at 2 {
+		1d_dmem {
 			filename = "lpddr4_pmu_train_1d_dmem.bin";
 			size = <0x4000>;
+			type = "blob-ext";
 		};
 
-		blob_3: blob-ext at 3 {
+		2d_imem {
 			filename = "lpddr4_pmu_train_2d_imem.bin";
 			size = <0x8000>;
+			type = "blob-ext";
 		};
 
-		blob_4: blob-ext at 4 {
+		2d_dmem {
 			filename = "lpddr4_pmu_train_2d_dmem.bin";
 			size = <0x4000>;
+			type = "blob-ext";
 		};
 	};
 
@@ -89,8 +93,9 @@
 					load = <CONFIG_SYS_TEXT_BASE>;
 					type = "standalone";
 
-					uboot_blob: blob-ext {
+					uboot_blob {
 						filename = "u-boot-nodtb.bin";
+						type = "blob-ext";
 					};
 				};
 
@@ -102,8 +107,9 @@
 					load = <0x920000>;
 					type = "firmware";
 
-					atf_blob: blob-ext {
+					atf_blob {
 						filename = "bl31.bin";
+						type = "blob-ext";
 					};
 				};
 
@@ -120,8 +126,9 @@
 					description = "NAME";
 					type = "flat_dt";
 
-					uboot_fdt_blob: blob-ext {
+					uboot_fdt_blob {
 						filename = "u-boot.dtb";
+						type = "blob-ext";
 					};
 				};
 			};
@@ -143,14 +150,16 @@
 		filename = "flash.bin";
 		pad-byte = <0x00>;
 
-		spl: blob-ext at 1 {
+		spl {
 			filename = "spl.bin";
 			offset = <0x0>;
+			type = "blob-ext";
 		};
 
-		binman_uboot: blob-ext at 2 {
+		binman_uboot: uboot {
 			filename = "u-boot.itb";
 			offset = <0x57c00>;
+			type = "blob-ext";
 		};
 	};
 };
-- 
2.26.2



More information about the U-Boot mailing list