[PATCH 2/2] ARM: stm32: Disable video output on DHSOM

[Marek Vasut]

The video output support is unused and disabling it saves about 20 kiB of space.
In case video output support is required, it can be re-enabled.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Patrice Chotard <patrice.chotard at foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
---
 configs/stm32mp15_dhcom_basic_defconfig | 14 +-------------
 configs/stm32mp15_dhcor_basic_defconfig | 14 +-------------
 2 files changed, 2 insertions(+), 26 deletions(-)

diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig
index ae9c3cdc25f..5ecc91c7c1b 100644
--- a/configs/stm32mp15_dhcom_basic_defconfig
+++ b/configs/stm32mp15_dhcom_basic_defconfig
@@ -22,6 +22,7 @@ CONFIG_SPL_FIT_SOURCE="board/dhelectronics/dh_stm32mp1/u-boot-dhcom.its"
 # CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_BOOTDELAY=1
 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
+CONFIG_CONSOLE_MUX=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
@@ -53,7 +54,6 @@ CONFIG_CMD_REMOTEPROC=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_BMP=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_TIMER=y
@@ -147,18 +147,6 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0483
 CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
 CONFIG_USB_GADGET_DWC2_OTG=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_DM_VIDEO=y
-CONFIG_BACKLIGHT_GPIO=y
-CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y
-CONFIG_VIDEO_LCD_RAYDIUM_RM68200=y
-CONFIG_VIDEO_STM32=y
-CONFIG_VIDEO_STM32_DSI=y
-CONFIG_VIDEO_STM32_MAX_XRES=1280
-CONFIG_VIDEO_STM32_MAX_YRES=800
-CONFIG_VIDEO_BMP_RLE8=y
-CONFIG_BMP_16BPP=y
-CONFIG_BMP_24BPP=y
-CONFIG_BMP_32BPP=y
 CONFIG_FAT_WRITE=y
 CONFIG_LZO=y
 CONFIG_FDT_FIXUP_PARTITIONS=y
diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig
index 98ba37c750e..7c410b8224a 100644
--- a/configs/stm32mp15_dhcor_basic_defconfig
+++ b/configs/stm32mp15_dhcor_basic_defconfig
@@ -20,6 +20,7 @@ CONFIG_SPL_FIT_SOURCE="board/dhelectronics/dh_stm32mp1/u-boot-dhcor.its"
 # CONFIG_USE_SPL_FIT_GENERATOR is not set
 CONFIG_BOOTDELAY=1
 CONFIG_BOOTCOMMAND="run bootcmd_stm32mp"
+CONFIG_CONSOLE_MUX=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_SPL_LEGACY_IMAGE_SUPPORT=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
@@ -51,7 +52,6 @@ CONFIG_CMD_REMOTEPROC=y
 CONFIG_CMD_SPI=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
-CONFIG_CMD_BMP=y
 CONFIG_CMD_CACHE=y
 CONFIG_CMD_TIME=y
 CONFIG_CMD_TIMER=y
@@ -141,18 +141,6 @@ CONFIG_USB_GADGET_VENDOR_NUM=0x0483
 CONFIG_USB_GADGET_PRODUCT_NUM=0x5720
 CONFIG_USB_GADGET_DWC2_OTG=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_DM_VIDEO=y
-CONFIG_BACKLIGHT_GPIO=y
-CONFIG_VIDEO_LCD_ORISETECH_OTM8009A=y
-CONFIG_VIDEO_LCD_RAYDIUM_RM68200=y
-CONFIG_VIDEO_STM32=y
-CONFIG_VIDEO_STM32_DSI=y
-CONFIG_VIDEO_STM32_MAX_XRES=1280
-CONFIG_VIDEO_STM32_MAX_YRES=800
-CONFIG_VIDEO_BMP_RLE8=y
-CONFIG_BMP_16BPP=y
-CONFIG_BMP_24BPP=y
-CONFIG_BMP_32BPP=y
 CONFIG_FAT_WRITE=y
 CONFIG_LZO=y
 CONFIG_FDT_FIXUP_PARTITIONS=y
-- 
2.33.0