[PATCH v2 25/41] bootstd: Add a bootflow ommand

Simon Glass sjg at chromium.org
Sun Oct 24 01:26:19 CEST 2021


Add a 'bootflow' command to handle listing and selection of bootflow.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

(no changes since v1)

 cmd/Kconfig    |  10 +-
 cmd/Makefile   |   2 +-
 cmd/bootflow.c | 386 +++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 395 insertions(+), 3 deletions(-)
 create mode 100644 cmd/bootflow.c

diff --git a/cmd/Kconfig b/cmd/Kconfig
index bb6b881660c..1b6900d7f52 100644
--- a/cmd/Kconfig
+++ b/cmd/Kconfig
@@ -195,12 +195,18 @@ config CMD_BOOTM
 	  Boot an application image from the memory.
 
 config CMD_BOOTSTD
-	bool "bootdev"
+	bool "bootdev, bootflow"
 	depends on BOOTSTD
 	default y
 	help
 	  Support working with standard boot, including listing available
-	  bootdevs and showing information about a particular one.
+	  bootdevs and showing information about a particular one. It also
+	  allows scanning for bootflows available with the bootdev.
+
+	  This enables the following commands:
+
+	     bootdev
+	     bootflow
 
 config BOOTM_EFI
 	bool "Support booting UEFI FIT images"
diff --git a/cmd/Makefile b/cmd/Makefile
index a8fce22d6c6..1b4ff861871 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -19,7 +19,7 @@ obj-$(CONFIG_CMD_AB_SELECT) += ab_select.o
 obj-$(CONFIG_CMD_ADC) += adc.o
 obj-$(CONFIG_CMD_ARMFLASH) += armflash.o
 obj-$(CONFIG_HAVE_BLOCK_DEVICE) += blk_common.o
-obj-$(CONFIG_CMD_BOOTSTD) += bootdev.o
+obj-$(CONFIG_CMD_BOOTSTD) += bootdev.o bootflow.o
 obj-$(CONFIG_CMD_SOURCE) += source.o
 obj-$(CONFIG_CMD_BCB) += bcb.o
 obj-$(CONFIG_CMD_BDI) += bdinfo.o
diff --git a/cmd/bootflow.c b/cmd/bootflow.c
new file mode 100644
index 00000000000..84b9970bd65
--- /dev/null
+++ b/cmd/bootflow.c
@@ -0,0 +1,386 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * 'bootflow' command
+ *
+ * Copyright 2021 Google LLC
+ * Written by Simon Glass <sjg at chromium.org>
+ */
+
+#include <common.h>
+#include <bootdev.h>
+#include <bootflow.h>
+#include <bootstd.h>
+#include <command.h>
+#include <console.h>
+#include <dm.h>
+#include <mapmem.h>
+
+/**
+ * report_bootflow_err() - Report where a bootflow failed
+ *
+ * When a bootflow does not make it to the 'loaded' state, something went wrong.
+ * Print a helpful message if there is an error
+ *
+ * @bflow: Bootflow to process
+ * @err: Error code (0 if none)
+ */
+static void report_bootflow_err(struct bootflow *bflow, int err)
+{
+	if (!err)
+		return;
+
+	/* Indent out to 'Method' */
+	printf("     ** ");
+
+	switch (bflow->state) {
+	case BOOTFLOWST_BASE:
+		printf("No media/partition found");
+		break;
+	case BOOTFLOWST_MEDIA:
+		printf("No partition found");
+		break;
+	case BOOTFLOWST_PART:
+		printf("No filesystem found");
+		break;
+	case BOOTFLOWST_FS:
+		printf("File not found");
+		break;
+	case BOOTFLOWST_FILE:
+		printf("File cannot be loaded");
+		break;
+	case BOOTFLOWST_READY:
+		printf("Ready");
+		break;
+	case BOOTFLOWST_COUNT:
+		break;
+	}
+
+	printf(", err=%d\n", err);
+}
+
+/**
+ * show_bootflow() - Show the status of a bootflow
+ *
+ * @seq: Bootflow index
+ * @bflow: Bootflow to show
+ * @errors: True to show the error received, if any
+ */
+static void show_bootflow(int index, struct bootflow *bflow, bool errors)
+{
+	printf("%3x  %-11s  %-6s  %-9.9s %4x  %-25.25s %s\n", index,
+	       bflow->method->name, bootflow_state_get_name(bflow->state),
+	       dev_get_uclass_name(dev_get_parent(bflow->dev)), bflow->part,
+	       bflow->name, bflow->fname);
+	if (errors)
+		report_bootflow_err(bflow, bflow->err);
+}
+
+static void show_header(void)
+{
+	printf("Seq  Method       State   Uclass    Part  Name                      Filename\n");
+	printf("---  -----------  ------  --------  ----  ------------------------  ----------------\n");
+}
+
+static void show_footer(int count, int num_valid)
+{
+	printf("---  -----------  ------  --------  ----  ------------------------  ----------------\n");
+	printf("(%d bootflow%s, %d valid)\n", count, count != 1 ? "s" : "",
+	       num_valid);
+}
+
+static int do_bootflow_list(struct cmd_tbl *cmdtp, int flag, int argc,
+			    char *const argv[])
+{
+	struct bootstd_priv *std;
+	struct udevice *dev;
+	struct bootflow *bflow;
+	int num_valid = 0;
+	bool errors = false;
+	int ret, i;
+
+	if (argc > 1 && *argv[1] == '-')
+		errors = strchr(argv[1], 'e');
+
+	ret = bootstd_get_priv(&std);
+	if (ret)
+		return CMD_RET_FAILURE;
+	dev = std->cur_bootdev;
+
+	/* If we have a device, just list bootflows attached to that device */
+	if (dev) {
+		printf("Showing bootflows for bootdev '%s'\n", dev->name);
+		show_header();
+		for (ret = bootdev_first_bootflow(dev, &bflow), i = 0;
+		     !ret;
+		     ret = bootdev_next_bootflow(&bflow), i++) {
+			num_valid += bflow->state == BOOTFLOWST_READY;
+			show_bootflow(i, bflow, errors);
+		}
+	} else {
+		printf("Showing all bootflows\n");
+		show_header();
+		for (ret = bootflow_first_glob(&bflow), i = 0;
+		     !ret;
+		     ret = bootflow_next_glob(&bflow), i++) {
+			num_valid += bflow->state == BOOTFLOWST_READY;
+			show_bootflow(i, bflow, errors);
+		}
+	}
+	show_footer(i, num_valid);
+
+	return 0;
+}
+
+static int do_bootflow_scan(struct cmd_tbl *cmdtp, int flag, int argc,
+			    char *const argv[])
+{
+	struct bootstd_priv *std;
+	struct bootflow_iter iter;
+	struct udevice *dev;
+	struct bootflow bflow;
+	bool all = false, boot = false, errors = false, list = false;
+	int num_valid = 0;
+	int ret, i;
+	int flags;
+
+	ret = bootstd_get_priv(&std);
+	if (ret)
+		return CMD_RET_FAILURE;
+	dev = std->cur_bootdev;
+
+	if (argc > 1 && *argv[1] == '-') {
+		all = strchr(argv[1], 'a');
+		boot = strchr(argv[1], 'b');
+		errors = strchr(argv[1], 'e');
+		list = strchr(argv[1], 'l');
+		argc--;
+		argv++;
+	}
+	if (argc > 1) {
+		const char *label = argv[1];
+
+		if (bootdev_find_by_any(label, &dev))
+			return CMD_RET_FAILURE;
+	}
+
+	std->cur_bootflow = NULL;
+
+	flags = 0;
+	if (list)
+		flags |= BOOTFLOWF_SHOW;
+	if (all)
+		flags |= BOOTFLOWF_ALL;
+
+	/*
+	 * If we have a device, just scan for bootflows attached to that device
+	 */
+	if (dev) {
+		if (list) {
+			printf("Scanning for bootflows in bootdev '%s'\n",
+			       dev->name);
+			show_header();
+		}
+		bootdev_clear_bootflows(dev);
+		for (i = 0,
+		     ret = bootflow_scan_bootdev(dev, &iter, flags, &bflow);
+		     i < 1000 && ret != -ENODEV;
+		     i++, ret = bootflow_scan_next(&iter, &bflow)) {
+			bflow.err = ret;
+			if (!ret)
+				num_valid++;
+			ret = bootdev_add_bootflow(&bflow);
+			if (ret) {
+				printf("Out of memory\n");
+				return CMD_RET_FAILURE;
+			}
+			if (list)
+				show_bootflow(i, &bflow, errors);
+			if (boot && !bflow.err)
+				bootflow_run_boot(&iter, &bflow);
+		}
+	} else {
+		if (list) {
+			printf("Scanning for bootflows in all bootdevs\n");
+			show_header();
+		}
+		bootstd_clear_glob();
+
+		for (i = 0,
+		     ret = bootflow_scan_first(&iter, flags, &bflow);
+		     i < 1000 && ret != -ENODEV;
+		     i++, ret = bootflow_scan_next(&iter, &bflow)) {
+			bflow.err = ret;
+			if (!ret)
+				num_valid++;
+			ret = bootdev_add_bootflow(&bflow);
+			if (ret) {
+				printf("Out of memory\n");
+				return CMD_RET_FAILURE;
+			}
+			if (list)
+				show_bootflow(i, &bflow, errors);
+			if (boot && !bflow.err) {
+				bootflow_run_boot(&iter, &bflow);
+			}
+		}
+	}
+	bootflow_iter_uninit(&iter);
+	if (list)
+		show_footer(i, num_valid);
+
+	return 0;
+}
+
+static int do_bootflow_select(struct cmd_tbl *cmdtp, int flag, int argc,
+			      char *const argv[])
+{
+	struct bootstd_priv *std;
+	struct bootflow *bflow, *found;
+	struct udevice *dev;
+	const char *name;
+	char *endp;
+	int seq, i;
+	int ret;
+
+	ret = bootstd_get_priv(&std);
+	if (ret)
+		return CMD_RET_FAILURE;
+;
+	if (argc < 2) {
+		std->cur_bootflow = NULL;
+		return 0;
+	}
+	dev = std->cur_bootdev;
+
+	name = argv[1];
+	seq = simple_strtol(name, &endp, 16);
+	found = NULL;
+
+	/*
+	 * If we have a bootdev device, only allow selection of bootflows
+	 * attached to that device
+	 */
+	if (dev) {
+		for (ret = bootdev_first_bootflow(dev, &bflow), i = 0;
+		     !ret;
+		     ret = bootdev_next_bootflow(&bflow), i++) {
+			if (*endp ? !strcmp(bflow->name, name) : (i == seq)) {
+				found = bflow;
+				break;
+			}
+		}
+	} else {
+		for (ret = bootflow_first_glob(&bflow), i = 0;
+		     !ret;
+		     ret = bootflow_next_glob(&bflow), i++) {
+			if (*endp ? !strcmp(bflow->name, name) : (i == seq)) {
+				found = bflow;
+				break;
+			}
+		}
+	}
+
+	if (!found) {
+		printf("Cannot find bootflow '%s' ", name);
+		if (dev)
+			printf("in bootdev '%s' ", dev->name);
+		printf("(err=%d)\n", ret);
+		return CMD_RET_FAILURE;
+	}
+	std->cur_bootflow = found;
+
+	return 0;
+}
+
+static int do_bootflow_info(struct cmd_tbl *cmdtp, int flag, int argc,
+			    char *const argv[])
+{
+	struct bootstd_priv *std;
+	struct bootflow *bflow;
+	bool dump = false;
+	int ret;
+
+	if (argc > 1 && *argv[1] == '-')
+		dump = strchr(argv[1], 'd');
+
+	ret = bootstd_get_priv(&std);
+	if (ret)
+		return CMD_RET_FAILURE;
+
+	if (!std->cur_bootflow) {
+		printf("No bootflow selected\n");
+		return CMD_RET_FAILURE;
+	}
+	bflow = std->cur_bootflow;
+
+	printf("Name:      %s\n", bflow->name);
+	printf("Device:    %s\n", bflow->dev->name);
+	printf("Block dev: %s\n", bflow->blk ? bflow->blk->name : "(none)");
+	printf("Method:    %s\n", bflow->method->name);
+	printf("State:     %s\n", bootflow_state_get_name(bflow->state));
+	printf("Partition: %d\n", bflow->part);
+	printf("Subdir:    %s\n", bflow->subdir ? bflow->subdir : "(none)");
+	printf("Filename:  %s\n", bflow->fname);
+	printf("Buffer:    %lx\n", (ulong)map_to_sysmem(bflow->buf));
+	printf("Size:      %x (%d bytes)\n", bflow->size, bflow->size);
+	printf("Error:     %d\n", bflow->err);
+	if (dump && bflow->buf) {
+		/* Set some sort of maximum on the size */
+		int size = min(bflow->size, 10 << 10);
+		int i;
+
+		printf("Contents:\n\n");
+		for (i = 0; i < size; i++) {
+			putc(bflow->buf[i]);
+			if (!(i % 128) && ctrlc()) {
+				printf("...interrupted\n");
+				break;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int do_bootflow_boot(struct cmd_tbl *cmdtp, int flag, int argc,
+			    char *const argv[])
+{
+	struct bootstd_priv *std;
+	struct bootflow *bflow;
+	int ret;
+
+	ret = bootstd_get_priv(&std);
+	if (ret)
+		return CMD_RET_FAILURE;
+
+	/*
+	 * Require a current bootflow. Users can use 'bootflow scan -b' to
+	 * automatically scan and boot, if needed.
+	 */
+	if (!std->cur_bootflow) {
+		printf("No bootflow selected\n");
+		return CMD_RET_FAILURE;
+	}
+	bflow = std->cur_bootflow;
+	ret = bootflow_run_boot(NULL, bflow);
+	if (ret)
+		return CMD_RET_FAILURE;
+
+	return 0;
+}
+
+#ifdef CONFIG_SYS_LONGHELP
+static char bootflow_help_text[] =
+	"scan [-abel] [bdev]   - scan for valid bootflows (-l list, -a all, -e errors, -b boot)\n"
+	"bootflow list [-e]             - list scanned bootflows (-e errors)\n"
+	"bootflow select [<num>|<name>] - select a bootflow\n"
+	"bootflow info [-d]             - show info on current bootflow (-d dump bootflow)\n"
+	"bootflow boot                  - boot current bootflow (or first available if none selected)";
+#endif
+
+U_BOOT_CMD_WITH_SUBCMDS(bootflow, "Boot flows", bootflow_help_text,
+	U_BOOT_SUBCMD_MKENT(scan, 3, 1, do_bootflow_scan),
+	U_BOOT_SUBCMD_MKENT(list, 2, 1, do_bootflow_list),
+	U_BOOT_SUBCMD_MKENT(select, 2, 1, do_bootflow_select),
+	U_BOOT_SUBCMD_MKENT(info, 2, 1, do_bootflow_info),
+	U_BOOT_SUBCMD_MKENT(boot, 1, 1, do_bootflow_boot));
-- 
2.33.0.1079.g6e70778dc9-goog



More information about the U-Boot mailing list