[PATCH] ARM: stm32: Enable DFU MTD support on DHSOM

[Patrice CHOTARD]

Hi Marek

On 10/23/21 8:32 PM, Marek Vasut wrote:
> All the STM32MP1 based DHSOM have SPI NOR from which they boot,
> enable DFU_MTD support to make it possible to expose that SPI NOR
> via the DFU.
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Patrice Chotard <patrice.chotard at foss.st.com>
> Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
> ---
>  configs/stm32mp15_dhcom_basic_defconfig | 2 ++
>  configs/stm32mp15_dhcor_basic_defconfig | 2 ++
>  2 files changed, 4 insertions(+)
> 
> diff --git a/configs/stm32mp15_dhcom_basic_defconfig b/configs/stm32mp15_dhcom_basic_defconfig
> index 5b85f6ad03b..083e199e511 100644
> --- a/configs/stm32mp15_dhcom_basic_defconfig
> +++ b/configs/stm32mp15_dhcom_basic_defconfig
> @@ -81,6 +81,7 @@ CONFIG_TFTP_BLOCKSIZE=1536
>  CONFIG_STM32_ADC=y
>  CONFIG_SPL_BLOCK_CACHE=y
>  CONFIG_DFU_MMC=y
> +CONFIG_DFU_MTD=y
>  CONFIG_DFU_RAM=y
>  CONFIG_DFU_VIRT=y
>  CONFIG_SET_DFU_ALT_INFO=y
> @@ -98,6 +99,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x50
>  CONFIG_SUPPORT_EMMC_BOOT=y
>  CONFIG_STM32_SDMMC2=y
>  CONFIG_MTD=y
> +CONFIG_DM_MTD=y
>  CONFIG_SYS_MTDPARTS_RUNTIME=y
>  CONFIG_DM_SPI_FLASH=y
>  CONFIG_SPI_FLASH_MACRONIX=y
> diff --git a/configs/stm32mp15_dhcor_basic_defconfig b/configs/stm32mp15_dhcor_basic_defconfig
> index 37dd2754c03..01ac3edb93e 100644
> --- a/configs/stm32mp15_dhcor_basic_defconfig
> +++ b/configs/stm32mp15_dhcor_basic_defconfig
> @@ -79,6 +79,7 @@ CONFIG_STM32_ADC=y
>  CONFIG_SPL_BLOCK_CACHE=y
>  CONFIG_DFU_MMC=y
>  CONFIG_DFU_RAM=y
> +CONFIG_DFU_MTD=y
>  CONFIG_DFU_VIRT=y
>  CONFIG_GPIO_HOG=y
>  CONFIG_DM_HWSPINLOCK=y
> @@ -94,6 +95,7 @@ CONFIG_SYS_I2C_EEPROM_ADDR=0x53
>  CONFIG_SUPPORT_EMMC_BOOT=y
>  CONFIG_STM32_SDMMC2=y
>  CONFIG_MTD=y
> +CONFIG_DM_MTD=y
>  CONFIG_DM_SPI_FLASH=y
>  CONFIG_SPI_FLASH_MACRONIX=y
>  CONFIG_SPI_FLASH_SPANSION=y
> 
Reviewed-by: Patrice Chotard <patrice.chotard at foss.st.com>
Thanks
Patrice