[PATCH] doc: Remove the obsolete README.mpc74xx file

Thomas Huth thuth at redhat.com
Mon Oct 25 08:56:14 CEST 2021


Support for the PPC74xx processors has been removed in commit
d928664f41 ("powerpc: 74xx_7xx: remove 74xx_7xx cpu support")
more than 6 years ago already. So the corresponding README file
can now be removed, too.

Signed-off-by: Thomas Huth <thuth at redhat.com>
---
 doc/README.mpc74xx | 22 ----------------------
 1 file changed, 22 deletions(-)
 delete mode 100644 doc/README.mpc74xx

diff --git a/doc/README.mpc74xx b/doc/README.mpc74xx
deleted file mode 100644
index f81f1c2e89..0000000000
--- a/doc/README.mpc74xx
+++ /dev/null
@@ -1,22 +0,0 @@
-This file contains status information for the port of U-Boot to the
-Motorola mpc74xx series of CPUs.
-
-Author: Josh Huber <huber at mclx.com>
-	Mission Critical Linux, Inc.
-
-Currently the support for these CPUs is pretty minimal, but enough to
-get things going.  (much like the support for the Galileo Eval Board)
-
-There is a framework in place to enable the L2 cache, and to program
-the BATs.  Currently, there are still problems with the code which
-sets up the L2 cache, so it's not enabled. (IMHO, it shouldn't be
-anyway).  Additionally, there is support for enabling the MMU, which
-we also don't do.  The BATs are programmed just for the benefit of
-jumping into Linux in a sane configuration.
-
-Most of the code was based on other cpus supported by U-Boot.
-
-If you find any errors in the CPU setup code, please send us a note.
-
-Thanks,
-Josh
-- 
2.27.0



More information about the U-Boot mailing list