[PATCH v2 4/4] power: pmic: axp: Implement poweroff via sysreset

Andre Przywara andre.przywara at arm.com
Mon Oct 25 16:09:02 CEST 2021


On Sun, 24 Oct 2021 21:00:10 -0500
Samuel Holland <samuel at sholland.org> wrote:

> The AXP PMICs have the ability to power off the system. The existing
> code for this is duplicated for each PMIC variant, and uses the legacy
> non-DM "pmic_bus" interface. When SYSRESET is enabled, this can all be
> replaced with a sysreset device using the DM_PMIC interface.
> 
> Since the trigger bit is the same on all PMIC variants, use the register
> definitions from the oldest supported PMIC.
> 
> Signed-off-by: Samuel Holland <samuel at sholland.org>

Thanks for the quick turnaround!

Reviewed-by: Andre Przywara <andre.przywara at arm.com>

Cheers,
Andre

> ---
> 
> Changes in v2:
>  - Rebased on top of u-boot/master (axp_pmic_bind)
> 
>  drivers/power/pmic/Kconfig |  2 ++
>  drivers/power/pmic/axp.c   | 49 +++++++++++++++++++++++++++++++++++++-
>  2 files changed, 50 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/power/pmic/Kconfig b/drivers/power/pmic/Kconfig
> index 92e2ace279..b9fda428df 100644
> --- a/drivers/power/pmic/Kconfig
> +++ b/drivers/power/pmic/Kconfig
> @@ -66,6 +66,8 @@ config PMIC_ACT8846
>  config PMIC_AXP
>  	bool "Enable Driver Model for X-Powers AXP PMICs"
>  	depends on DM_I2C
> +	select SYSRESET_CMD_POWEROFF if SYSRESET && CMD_POWEROFF
> +	imply CMD_POWEROFF if SYSRESET
>  	help
>  	  This config enables driver-model PMIC uclass features for
>  	  X-Powers AXP152, AXP2xx, and AXP8xx PMICs.
> diff --git a/drivers/power/pmic/axp.c b/drivers/power/pmic/axp.c
> index 74c94bdb47..0f2b24a8b5 100644
> --- a/drivers/power/pmic/axp.c
> +++ b/drivers/power/pmic/axp.c
> @@ -1,8 +1,37 @@
>  // SPDX-License-Identifier: GPL-2.0+
>  
> +#include <axp_pmic.h>
>  #include <dm.h>
> +#include <dm/lists.h>
>  #include <i2c.h>
>  #include <power/pmic.h>
> +#include <sysreset.h>
> +
> +#if CONFIG_IS_ENABLED(SYSRESET)
> +static int axp_sysreset_request(struct udevice *dev, enum sysreset_t type)
> +{
> +	int ret;
> +
> +	if (type != SYSRESET_POWER_OFF)
> +		return -EPROTONOSUPPORT;
> +
> +	ret = pmic_clrsetbits(dev->parent, AXP152_SHUTDOWN, 0, AXP152_POWEROFF);
> +	if (ret < 0)
> +		return ret;
> +
> +	return -EINPROGRESS;
> +}
> +
> +static struct sysreset_ops axp_sysreset_ops = {
> +	.request	= axp_sysreset_request,
> +};
> +
> +U_BOOT_DRIVER(axp_sysreset) = {
> +	.name		= "axp_sysreset",
> +	.id		= UCLASS_SYSRESET,
> +	.ops		= &axp_sysreset_ops,
> +};
> +#endif
>  
>  static int axp_pmic_reg_count(struct udevice *dev)
>  {
> @@ -16,6 +45,24 @@ static struct dm_pmic_ops axp_pmic_ops = {
>  	.write		= dm_i2c_write,
>  };
>  
> +static int axp_pmic_bind(struct udevice *dev)
> +{
> +	int ret;
> +
> +	ret = dm_scan_fdt_dev(dev);
> +	if (ret)
> +		return ret;
> +
> +	if (CONFIG_IS_ENABLED(SYSRESET)) {
> +		ret = device_bind_driver_to_node(dev, "axp_sysreset", "axp_sysreset",
> +						 dev_ofnode(dev), NULL);
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return 0;
> +}
> +
>  static const struct udevice_id axp_pmic_ids[] = {
>  	{ .compatible = "x-powers,axp152" },
>  	{ .compatible = "x-powers,axp202" },
> @@ -33,6 +80,6 @@ U_BOOT_DRIVER(axp_pmic) = {
>  	.name		= "axp_pmic",
>  	.id		= UCLASS_PMIC,
>  	.of_match	= axp_pmic_ids,
> -	.bind		= dm_scan_fdt_dev,
> +	.bind		= axp_pmic_bind,
>  	.ops		= &axp_pmic_ops,
>  };



More information about the U-Boot mailing list