[PATCH 1/1] doc: remove AMCC PPC405 processor references

[Stefan Roese]

On 23.10.21 13:14, Heinrich Schuchardt wrote:
> Support for PPC4XX processors has been removed. So we should not mention it
> in the documentation.
> 
> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt at canonical.com>

Reviewed-by: Stefan Roese <sr at denx.de>

Thanks,
Stefan

> ---
>   doc/README.bedbug | 22 ----------------------
>   1 file changed, 22 deletions(-)
> 
> diff --git a/doc/README.bedbug b/doc/README.bedbug
> index 35e9d2706a..1a2acd0f14 100644
> --- a/doc/README.bedbug
> +++ b/doc/README.bedbug
> @@ -2,8 +2,6 @@ BEDBUG Support for U-Boot
>   --------------------------
>   
>   These changes implement the bedbug (emBEDded deBUGger) debugger in U-Boot.
> -A specific implementation is made for the AMCC 405 processor but other flavors
> -can be easily implemented.
>   
>   #####################
>   ### Modifications ###
> @@ -12,25 +10,9 @@ can be easily implemented.
>   ./common/Makefile
>   	Included cmd_bedbug.c and bedbug.c in the Makefile.
>   
> -./common/command.c
> -	Added bedbug commands to command table.
> -
>   ./common/board.c
>   	Added call to initialize debugger on startup.
>   
> -./arch/powerpc/cpu/ppc4xx/Makefile
> -	Added bedbug_405.c to the Makefile.
> -
> -./arch/powerpc/cpu/ppc4xx/start.S
> -	Added code to handle the debug exception (0x2000) on the 405.
> -	Also added code to handle critical exceptions since the debug
> -	is treated as critical on the 405.
> -
> -./arch/powerpc/cpu/ppc4xx/traps.c
> -	Added more detailed output for the program exception to tell
> -	if it is an illegal instruction, privileged instruction or
> -	a trap. Also added debug trap handler.
> -
>   ./include/ppc_asm.tmpl
>   	Added code to handle critical exceptions
>   
> @@ -51,10 +33,6 @@ can be easily implemented.
>   	hardware breakpoints and stepping through code.  These
>   	routines are common to all PowerPC processors.
>   
> -./arch/powerpc/cpu/ppc4xx/bedbug_405.c
> -	AMCC  PPC405 specific debugger routines.
> -
> -
>   Bedbug support for the MPC860
>   -----------------------------
>   
> 


Viele Grüße,
Stefan

-- 
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-51 Fax: (+49)-8142-66989-80 Email: sr at denx.de