[PATCH u-boot-marvell 00/13] Yet another kwboot improvements

Stefan Roese sr at denx.de
Tue Oct 26 17:25:10 CEST 2021

On 26.10.21 17:20, Marek Behún wrote:
> On Tue, 26 Oct 2021 17:13:05 +0200
> Stefan Roese <sr at denx.de> wrote:
>> Here is now just hangs forever. No output from main U-Boot proper at
>> all. This happed every time, when the baudrate is changed, meaning a
>> non 115200 -B is passed to kwboot. I checked with 115201 and here no
>> U-Boot proper output is printed as well.
>>> If there are timeout errors related to "Waiting 1s for baudrate change
>>> magic" then increasing 1s (1000 ms value) to e.g. 10s could help.
>> I changed the timeout to 10s without any change. It did not help.
> At what address is the image being sent to? Please send dumpimage
> output for the kwb image.

[stefan at ryzen u-boot-marvell (kwboot-test1)]$ ./tools/dumpimage -l 
Image Type:   MVEBU Boot from spi Image
Image version:1
BIN Hdr Size: 89196 Bytes = 87.11 KiB = 0.09 MiB
Data Size:    548604 Bytes = 535.75 KiB = 0.52 MiB
Load Address: 00800000
Entry Point:  00800000

> Is it possible to connect JTAG to the board?

It is. But this would be a bit difficult for me, to dig all these old
tools out and find the correct configuration of the BDI.


More information about the U-Boot mailing list