[PATCH v8 00/12] aspeed: Support secure boot chain with FIT image verification

Chia-Wei Wang chiawei_wang at aspeedtech.com
Wed Oct 27 08:17:23 CEST 2021


This patch series intends to provide a secure boot chain from SPL to Linux kernel
based on the hash and signature verification of FIT image paradigm.

To improve the performance and save code size (SPL is limited to 64KB due to HW-RoT),
the drviers of two HW crypto engine HACE and ACRY are also added for AST26xx SoCs.

As HACE and ACRY can only access to DRAM space, additional configuration and
boot command are also updated according to move each FIT image before its booting.

In addition, the common code of FIT image hash algorithm lookup is also revised
to leverage the HW accelerated calculation.

v8:
 - include reviewers' tag
 - address comments suggested by Joel
 - move this patch series back to the master branch as DM_HASH has been merged

v7:
 - fix missing interrupt status clear for ACRY RSA operation

v6:
 - fix parameter comment for v5 update

v5:
 - fix inconsistent parameter name due to parallel patch work

v4:
 - add new DM_HASH based driver for Aspeed HACE
 - remove SPL board init, which was originally used to probe non-DM HACE driver
 - fix typo of ARCY to ACRY
 - refactor defconfig based on the new Kconfig of U-Boot next branch

v3:
 - add SW work around for HACE HW DMA issue by resetting HACE
 - add reset control for HACE device tree node
 - sync all of the HACE error message to use debug()

v2:
 - update commit authors

Chia-Wei Wang (9):
  image: fit: Fix parameter name for hash algorithm
  aspeed: ast2600: Enlarge SRAM size
  clk: ast2600: Add RSACLK control for ACRY
  crypto: aspeed: Add AST2600 ACRY support
  ARM: dts: ast2600: Add ACRY to device tree
  ast2600: spl: Locate load buffer in DRAM space
  configs: ast2600-evb: Enable SPL FIT support
  configs: aspeed: Make EXTRA_ENV_SETTINGS board specific
  configs: ast2600: Boot kernel FIT in DRAM

Joel Stanley (2):
  clk: ast2600: Add YCLK control for HACE
  ARM: dts: ast2600: Add HACE to device tree

Johnny Huang (1):
  crypto: aspeed: Add AST2600 HACE support

 arch/arm/dts/ast2600-evb.dts                  |  10 +
 arch/arm/dts/ast2600.dtsi                     |  17 +
 arch/arm/include/asm/arch-aspeed/platform.h   |   2 +-
 .../arm/include/asm/arch-aspeed/scu_ast2600.h |   6 +-
 arch/arm/mach-aspeed/ast2600/spl.c            |   9 +-
 common/image-fit.c                            |   4 +-
 configs/evb-ast2600_defconfig                 |  22 +-
 drivers/clk/aspeed/clk_ast2600.c              |  46 +++
 drivers/crypto/Kconfig                        |   2 +
 drivers/crypto/Makefile                       |   1 +
 drivers/crypto/aspeed/Kconfig                 |  20 +
 drivers/crypto/aspeed/Makefile                |   2 +
 drivers/crypto/aspeed/aspeed_acry.c           | 190 +++++++++
 drivers/crypto/aspeed/aspeed_hace.c           | 381 ++++++++++++++++++
 drivers/crypto/hash/Kconfig                   |   8 +
 include/configs/aspeed-common.h               |   9 -
 include/configs/evb_ast2500.h                 |   7 +
 include/configs/evb_ast2600.h                 |  14 +
 lib/rsa/Kconfig                               |  10 +-
 19 files changed, 733 insertions(+), 27 deletions(-)
 create mode 100644 drivers/crypto/aspeed/Kconfig
 create mode 100644 drivers/crypto/aspeed/Makefile
 create mode 100644 drivers/crypto/aspeed/aspeed_acry.c
 create mode 100644 drivers/crypto/aspeed/aspeed_hace.c

-- 
2.25.1



More information about the U-Boot mailing list