[PATCH v2 1/2] x86: tangier: Enable support for SD/SDIO family in the pinmux driver
Andy Shevchenko
andriy.shevchenko at linux.intel.com
Wed Oct 27 13:28:09 CEST 2021
We would need to quirk out the Card Detect case and for that we allow
configuring the SD/SDIO family of pins.
Signed-off-by: Andy Shevchenko <andriy.shevchenko at linux.intel.com>
Reviewed-by: Bin Meng <bmeng.cn at gmail.com>
---
v2: added tag, promised to deduplicate the code in the future (Bin)
arch/x86/cpu/tangier/pinmux.c | 39 ++++++++++++++++++++++++++++++-----
1 file changed, 34 insertions(+), 5 deletions(-)
diff --git a/arch/x86/cpu/tangier/pinmux.c b/arch/x86/cpu/tangier/pinmux.c
index acf97e3af51d..8385167b2b6b 100644
--- a/arch/x86/cpu/tangier/pinmux.c
+++ b/arch/x86/cpu/tangier/pinmux.c
@@ -37,8 +37,9 @@ struct mrfld_family {
.npins = (e) - (s) + 1, \
}
-/* Now we only support I2C family of pins */
+/* Now we only support SD/SDIO and I2C families of pins */
static struct mrfld_family mrfld_families[] = {
+ MRFLD_FAMILY(3, 37, 56),
MRFLD_FAMILY(7, 101, 114),
};
@@ -125,6 +126,34 @@ static int mrfld_pinconfig_protected(unsigned int pin, u32 mask, u32 bits)
return ret;
}
+static int mrfld_pinconfig(unsigned int pin, u32 mask, u32 bits)
+{
+ struct mrfld_pinctrl *pinctrl;
+ struct udevice *dev;
+ void __iomem *bufcfg;
+ u32 v, value;
+ int ret;
+
+ ret = syscon_get_by_driver_data(X86_SYSCON_PINCONF, &dev);
+ if (ret)
+ return ret;
+
+ pinctrl = dev_get_priv(dev);
+
+ bufcfg = mrfld_get_bufcfg(pinctrl, pin);
+ if (!bufcfg)
+ return -EINVAL;
+
+ value = readl(bufcfg);
+ v = (value & ~mask) | (bits & mask);
+ writel(v, bufcfg);
+
+ debug("v: 0x%x p: 0x%x bits: %d, mask: %d bufcfg: 0x%p\n",
+ v, (u32)bufcfg, bits, mask, bufcfg);
+
+ return 0;
+}
+
static int mrfld_pinctrl_cfg_pin(ofnode pin_node)
{
bool is_protected;
@@ -133,10 +162,7 @@ static int mrfld_pinctrl_cfg_pin(ofnode pin_node)
u32 mask;
int ret;
- /* For now we only support just protected Family of pins */
is_protected = ofnode_read_bool(pin_node, "protected");
- if (!is_protected)
- return -ENOTSUPP;
pad_offset = ofnode_read_s32_default(pin_node, "pad-offset", -1);
if (pad_offset == -1)
@@ -152,7 +178,10 @@ static int mrfld_pinctrl_cfg_pin(ofnode pin_node)
if (mode & ~mask)
return -ENOTSUPP;
- ret = mrfld_pinconfig_protected(pad_offset, mask, mode);
+ if (is_protected)
+ ret = mrfld_pinconfig_protected(pad_offset, mask, mode);
+ else
+ ret = mrfld_pinconfig(pad_offset, mask, mode);
return ret;
}
--
2.33.0
More information about the U-Boot
mailing list